Selecting Midi Channels; Selecting Presets; Adjusting Volume & Pan Position; Midi Channel Selection - E-Mu Vintage Keys Operation Manual

Classic analog keyboards
Hide thumbs Also See for Vintage Keys:
Table of Contents

Advertisement

BASIC OPERATION
• • • If Vintage Keys is not
responding properly or plays
the wrong preset, make sure
that both Vintage Keys and
your MIDI controller are set
to the same MIDI channel
and that the MIDI Volume is
turned up.
For more information about
MIDI, see MIDI Realtime
Controls on page 40.
••• Channel Pan should
normally be set to "P" unless
realtime control of panning is
desired. This will allow the
programmed pan setting for
each preset to be used.

MIDI CHANNEL SELECTION

Press the cursor key repeatedly until the cursor is underneath the
channel number. (The cursor is a little flashing line underneath one of
the parameters in the display.) Rotate the data entry control to select
MIDI channel 01-16. As the channel is changed, the display will
change to show the preset, volume and pan associated with the dis-
played channel.
MIDI Channel
C01 Vol127 Pan=P
Preset No.
000 Preset Name
PRESET SELECTION
Press the cursor key repeatedly until the cursor is underneath the
preset number. (The cursor is a little flashing line underneath one of
the parameters in the display.) As the data entry control is rotated, the
preset number and name will change. The displayed preset will be
assigned to the displayed MIDI channel. Preset numbers range from
000 to 511.
C01 Vol127 Pan=P
000 Preset Name

CHANNEL VOLUME

Press the cursor key repeatedly until the cursor is underneath the
volume value. Rotate the data entry control to select volume 00-127.
(This is the same parameter as MIDI volume control #7, and changes
made over MIDI will be shown in the display.)
CHANNEL PAN
Press the cursor key repeatedly until the cursor is underneath the pan
value. Rotate the data entry control to select pan values -7 to +7 or
"P". When "P" is selected, the pan value specified in the preset is
selected. Any other value will override the pan parameter in the pre-
set. (This is the same parameter as MIDI pan control #10, and changes
made over MIDI will be shown in the display.)
12
Vintage Keys Operation Manual
Volume
Stereo Position
Preset Name
÷
MIDI Channel Parameters
÷
Preset Information

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents