Honda Civic Hybrid 2004 Online Reference Owner's Manual page 166

Replacing the Front Side Marker/
Turn Signal and Parking Light
Bulb
HOLDING CLIP
1. If you are changing the bulb on
the driver's side, start the engine,
turn the steering wheel all the way
to the right, and turn off the
engine. If you are changing the
bulb on the passenger's side, turn
the steering wheel to the left.
SOCKET
BULB
2. Use a flat-tipped screwdriver to
remove the holding clip from the
inner fender, and pull the inner
fender cover back.
3. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
4. Remove the bulb from the socket
by pushing it in and turning the
bulb counterclockwise until it
unlocks.
5. Install the new bulb in the socket.
Turn it clockwise to lock it in place.
6. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
7. Test the lights to make sure the
new bulb is working.
8. Put the inner fender cover in place.
Install the holding clip. Lock it in
place by pushing on the center.
Maintenance
Lights
163