Electronic Speed Controller; Basic Wiring Diagram - Tamco Ranger Instruction Manual & Parts Catalogue

Electronic Speed Controller

Specification
input voltage V
BEC output voltage V —current A
Output Current
Motor
ESC Size
Operational Notes
Turn on Transmitter and connect battery.
Turn on the low voltage switch followed by the power switch, this will produce a red light and a
audible sound from the motor.
The ESC has a low voltage protection function, if the voltage of the battery drops to low the power
will cut off, if this happens turn off the car and transmitter and recharge battery.
If you remove have to remove the ESC unit for service or repair, please ensure you re connect the
battery connectors correctly by matching the polarities/colours.
Please Note. – The ESC and Motor can become hot if used constantly, if this happens disconnect battery
and ESC and allow them to cool down before continuing.

Basic Wiring Diagram

Receiver
6V-8.4V DC
6V—2A
Operating Current 40A Max 320A,
Backward 160A
Above 540 17T
46.51 x 32.36 x 37.10mm
Steering
Servo
E.S.C
Battery Pack
Motor