Advertisement
Quick Links
QUICK SETUP GUIDE
GETTING STARTED
Capture consists of two main parts – the quick-release plate and the clip. Both are made from die-cast,
®
post-machined powder coated aluminum. All parts are weatherproof and have a lifetime guarantee.
(B) quick-release
button
(C) clip
(D) back plate
INSTALL THE PLATE
1
Remove the quick-release plate
from the clip by pressing the
quick-release button. Install the
plate onto the tripod mount on
the bottom of your camera.
Screw the plate in with a coin or
screwdriver, twisting it tight to
ensure a solid connection.
On a belt: loop the backplate behind your
belt to the right of your buckle. Swivel the clip
closed and hand-tighten the clamping bolts.
Capture works best when the top clamping
bolt rests on the top edge of your belt.
CLIP IN YOUR CAMERA
4
Lock your camera in by sliding the quick-release plate into the clip. Insert your camera
with the lens facing down to maximize stability and comfort. You can slide your camera
into the clip in any direction, allowing for easy lens changes.
USAGE TIPS FOR PROS
Always ensure the quick-release plate is tightened securely to
your camera using a screwdriver or coin.
If you have a heavy body or large lens, try using Capture with a
professional camera belt like the ThinkTank ProSpeed®
On the backpack, wear Capture on your left shoulder with the
quick-release button right to maximize ease of access.
On the belt, wear Capture with the quick-release button facing
down. This lets you grab your camera with one hand.
If you have a long lens, wear Capture on the side of your hip. If you
have a shorter lens, Capture works best toward the center of your
belt or mounted to a backpack.
Capture's standard quick-release plate fits in any ARCA-type tripod
head. A Manfrotto-compatible plate will be available soon.
For fast and easy lens changing, insert your camera into
Capture with the lens facing sideways or up.
For more information including videos and reviews, visit peakdesignltd.com
For media inquiries, contact Chris Dickey at chris.dickey@purpleorangepr.com
For dealer inquiries, contact us at dealer@peakdesignltd.com
(A) quick-release plate
(ARCA®-type compatible)
1
2
WEAR THE CLIP
3
On a backpack: the backplate sits behind
your left backpack strap and the clip sits in
front of it. To get Capture around thick
shoulder straps you can loosen the
clamping bolts all the way or remove them.
Capture fits any strap up to 3 inches wide
and 0.5 inches thick.
TAKE YOUR CAMERA
5
EVERYWHERE
Capture holds your camera rigidly, which means
you can do any physical activity with your DSLR.
To access your camera simply press the
quick-release button and slide your camera out.
capture
camera clip system
(E) hand
strap loops
(F) twist-lock
(G) clamping
bolts
OPEN THE CLIP
2
The clip is made up of
two plates that clamp
together. Loosen the
clamping bolts to
unclamp the plates and
swivel them apart.
peak design
®
®
Advertisement
Summary of Contents for PEAK DESIGN Camera Accessories
-
Page 1: Getting Started
® camera clip system GETTING STARTED Capture consists of two main parts – the quick-release plate and the clip. Both are made from die-cast, ® post-machined powder coated aluminum. All parts are weatherproof and have a lifetime guarantee. (A) quick-release plate (ARCA®-type compatible) - Page 2 Capture as a tool for large body cameras because it is a matter of opinion on how effective it is. Without question, the benefits of Capture are diminished anytime your setup’s weight ventures too far from the base of the camera.
- Page 3 Using Capture with heavy cameras & lenses: Capture works best with small to mid size DSLR cameras, but you can still comfortably use • Capture with full-frame camera bodies like the Nikon D3 or Canon 1D, as well as cameras with bulky telephoto lenses.
- Page 4 Push the bottom plate through the loop. This step requires a bit of elbow grease, but both Capture and the Think Tank Photo belts are more than sturdy enough to handle it. You’ll find that Capture’s bottom plate fits snugly through the loop without a...