Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung 450 Series User Manual

When the 1V is initially powered on, basic settings proceed automatically.
~ Connecting the power cord and antenna.
POWER
~
Connecting to an Antenna
Press the ENTER
~
button.
Press the. or T button, the select the desired OSD (On Screen
Display) language.
Press the .... or
~
button, then press the ENTER
~
button.
• Select the
Home Use
mode.
Store Demo
Mode is for retail
environments.
• To return the unit's settings from
Store Demo to Home Use
(standard): Press the volume button on the 1V. When you see the
volume in the OSD, press and hold
MENU
for 5 sec.
Press the. or T button, then press the
ENTER
~
button. Select
Air, Cable or Auto.
~
In
Cable
mode, you can select the correct signal source among
STD, HRC,
and
IRC
by pressing the .,
T, ....
or
~
button, then press the
ENTER
~
button.
The channel search will start automatically.
For more information, refer to
Channel
-+
Auto Program.
(P. 12)
~
Press the
ENTER
~
button at any time to interrupt the memorization process.
Set the
Clock Mode
automatically or manually.
~
If you select the
Auto,
set the daylight saving time.
Select the time zone where you live.
The connection method for the best HD screen quality is displayed.
Press the
ENTER ~
button.
Plug & Play (Initial Setup)
~
~
Power Input
When the 1V is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERC!)
button.
Plug & Play
is available only when the
Input
source is set to TV.
~
To return to the previous step, press the red button.
If You Want to Reset This Feature...
~
MENU lID
-+
Setup
-+
Plug & Play
-+
ENTER
~
English
7