Table of Contents
Advertisement
General features
Auxiliary Input Display Setting
Selecting the display when this device is switched to Auxiliary
input source.
1
Select Auxiliary input source
Press the [SRC] button.
Select the "AUX"/"AUX1" display.
2
Enter Auxiliary input display setting mode
Press the [NAME.S] button for at least 2 seconds.
The presently selected AUX Name is blinks.
3
Select the Auxiliary input display
Press the [4] or [¢] button.
Each time the button is pressed it switches through the below
displays.
• "AUX"/"AUX1"
• "TV"
• "VIDEO"
• "GAME"
• "PORTABLE"
• "DVD"
4
Exit Auxiliary input display setting mode
Press the [NAME.S] button.
When operation stops for 10 seconds, the name at that time is
selected, and Auxiliary input display setting mode closes.
Non-fading Output
Turning the Non-fading output ON or OFF.
Press the [NF] button for at least 1 second.
Each time the button is pressed Non-fading output switches ON
or OFF.
When it's ON, "NF ON" is displayed.
When the <Switching preout> (page 30) is "SWPRE Rear", this
function is not available.
Panel Position Setting
Setting the angle or back-forward position of the control panel.
1
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "PNL" is displayed above the [4]
button.
2
Enter Panel Position Setting mode
Press the [4] ("PNL") button.
3
Select the item for adjustment
Press the desired [2] — [5] button.
Each time the button is pressed the items that can be adjusted
switch as shown below.
Adjustment Item
The panel tilts upwards
The panel tilts downwards
The panel slides backward
The panel slides forward
4
Exit Panel Position Setting mode
Press the [RTN] button.
The control panel may be interfered with the shift lever or another
part depending on the angles of the control panel.
Set the angle to avoid any interference.
No sound is produced while the panel is operating.
— 14 —
Button
Display
[2]
"ANG–"
[3]
"ANG+"
[4]
"SLD–"
[5]
"SLD+"
Advertisement
Table of Contents
