Zagg ZAGGfolio Instruction Manual

INSIDE LEFT
Inserting/Removing the iPad® 2 and Keyboard
To insert the iPad®, have keyboard on the
left with iPad® home button facing you
and slide the iPad® in and to the right.
To remove the iPad®, pull the left side.
To remove the keyboard pull to the right.
To insert the keyboard, align and slide to
the left.
Positioning
Place the iPad® into the central groove
and lean back. When using keyboard by
itself, iPad® can be used in both portrait
and landscape mode.
When the iPad® is in the ZAGGfolio without
the keyboard, align with keyboard side
and lean back.
Powering on and pairing your keyboard
The Bluetooth® keyboard should only need to pair to your iPad® once
as follows:
1. On the keyboard, slide the power switch on. The status light
illuminates for four seconds, and then it turns o .
2. On the iPad® 2 select Settings > General > Bluetooth® > On.
3. Press the Connect button on the keyboard to make it
discoverable. The status light flashes on keyboard and the
iPad® displays "ZAGG Keyboard" as an available device.
4. Select "ZAGG Keyboard" on the iPad®. The iPad® will display
a unique code.
5. Type the code using the keyboard and press enter. The
keyboard is now paired to the iPad®.
Lights and buttons
Charging light:
Turns on when charging and turns o when fully charged
Status light:
1. Flashes when the battery is low (approximately 20% charge and two
to four days of use remaining)
2. Flashes when pairing
3. Lights briefly when you turn on the keyboard, and then turns o
Charging light
Status light
Battery
The ZAGGfolio uses a long-life, rechargeable battery that gives you
several weeks of normal use. The keyboard goes into sleep mode if
it's left on and not being used. Press any key and wait a second or
two to bring the keyboard out of sleep mode.
The lithium-polymer battery in the keyboard has no memory e ect
and may be charged whenever you wish.
When not in use for a prolonged period, we recommend that you
turn o the keyboard to lengthen the battery life.
INSIDE RIGHT
status
connect
Bluetooth® button