Installing Batteries - First Texas Products VLF 2.1 User Manual

Installing Batteries

Use 9-volt ALKALINE batteries only!
1. Remove the Battery Compartment Cover from the top of the
control housing.
2. Pull out the two battery connectors.
3. Snap on two 9-volt ALKALINE batteries.
Do not use Heavy Duty or ordinary Zinc Carbon batteries.
4. Slide batteries into position as illustrated below.
5. Replace the Battery Compartment Cover.
Slide over until it shuts securely in place.
WARNING
- Never mix old and new batteries.
- Never mix alkaline, standard (carbon-zinc),
rechargeable (nickel-cadmium) batteries.
- Never dispose of batteries in fire, as they may explode.
- Never attempt to charge non-chargeable batteries.
- Always remove exhausted batteries from metal detector.
4