Advertisement
c. Two Joystick Operation: If desired, a second Joystick can be added to allow two drivers to operate a single robot.
Simply connect a second VEXnet Joystick or a Partner Joystick to your main VEXnet Joystick using a coiled handset
cable plugged into the Joysticks' PARTNER Ports. Only the main Joystick should have a VEXnet Key installed.
When using the Default Code, you will need to install a jumper into Digital Port 11 in order to activate two-Joystick
operation.
d. Limit Switch Inputs: The Default Code allows jumpers or switches to be installed in the Analog Ports to limit certain
motor directions. These are useful for stopping a motor when an arm bottoms out. A limit switch plugged in to
Analog 1 will stop Motor 6 from turning counterclockwise when activated. A limit switch plugged in to Analog 2 will
stop Motor 6 from turning clockwise when activated.
Page 5 of 14
Cortex Microcontroller and VEXnet Joystick User Guide
Advertisement
