Maintenance; Operation - RIDGID R859 Operator's Manual

24 volt lithium-ion cordless worklight
Table of Contents

Advertisement

OPERATION

WORKLIGHT IS FOR HOUSEHOLD USE ONLY
BATTERY PACK

MAINTENANCE

BATTERIES
The battery pack for this tool is equipped with lithium-ion
rechargeable batteries. Length of service from each charging
will depend on the type of work you are doing.
The batteries in this tool have been designed to provide
maximum trouble-free life. However, like all batteries, they
will eventually wear out. Do not disassemble battery pack
and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewelry, could
result in a serious burn.
To obtain the longest possible battery life, we suggest the
following:
 Remove the battery pack from the charger once it is fully
charged and ready for use.
For battery pack storage longer than 30 days:
 Store the battery pack where the temperature is below
80°F and away from moisture.
 Store battery packs in a 30%-50% charged condition.
 Every six months of storage, charge the pack as nor-
mal.
GENERAL MAINTENANCE
Wipe the battery pack, flashlight, and charger with a clean, dry cloth periodically to remove any dust or debris.
ALIGN RAISED RIBS
WITH GROOVE INSIDE
WORKLIGHT BASE;
SLIDE TOGETHER UNTIL
LATCHES CLICK.
RAISED RIBS
LATCHES
Fig. 4
WIDE-ANGLE BEAM
(TURN ADJUSTMENT
RING CLOCKWISE)
SPOT BEAM
(TURN ADJUSTMENT RING
COUNTERCLOCKWISE)
BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING
To preserve natural resources, please
recycle or dispose of batteries
properly.
This product contains lithium-ion
batteries. Local, state or federal laws
Li - Ion
may prohibit disposal of lithium-ion
batteries in ordinary trash.
Consult your local waste authority for information regarding
available recycling and/or disposal options.
WARNING:
Upon removal, cover the battery pack's terminals
with heavy-duty adhesive tape. Do not attempt to
destroy or disassemble battery pack or remove any
of its components. Lithium-ion batteries must be
recycled or disposed of properly. Also, never touch
both terminals with metal objects and/or body
parts as short circuit may result. Keep away from
children. Failure to comply with these warnings
could result in fire and/or serious injury.
8
ADJUSTABLE
180° ROTATING
BEAM
HEAD
SWITCH
TRIGGER
Fig. 5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents