Portable speaker system for ipod and iphone (5 pages)
Summary of Contents for Monoprice PID 10951
Page 1
MONOPRICE ™ Bluetooth Party Speaker PID 10951 Quick Start Guide...
Page 2
Front Panel Controls and Connections: 1. MIC VOLUME: Controls the volume level of the two microphone inputs. Note that both MIC inputs are simultaneously active. 2. AUX VOLUME: Controls the volume level of the line level AUX inputs as well as the wireless Bluetooth input.
Page 3
9. USB Port: Plug a USB 2.0 flash drive with mp3 and/or wma files to playback using the built-in mp3 player. 10. SD/MMC Card Slot: Plug an SD card or MMC card with mp3 and/or wma files to playback using the built-in mp3 player. Note that the SD Card can hold any number of mp3/wma files, but you are limited to a total of 999 directories/folders on the card.
Page 4
Rear Panel Controls and Connections: 1. Battery Level: Indicates the current charge level of the built-in battery. If the red LED is lit, the battery should be charged immediately. Failure to charge the battery when it is depleted can cause damage to the battery and/or speaker system. 2.
Battery Replacement: 1. Use a #2 Phillips screwdriver to remove the four screws holding the battery compartment cover in place, then remove the cover. 2. Pull the battery out of its compartment. Remove the positive (red) lead from the battery, then remove the negative (blue) lead.
Specifications: 10951 Model Woofer Driver 8" paper cone with foam surround Tweeter Driver 1/2" PEI dome tweeter Power using AC (10% THD) 50 watts Power using AC (1% THD) 22 watts 18 watts Power using Battery (10% THD) Power using Battery (1% THD) 15 watts THD @ 1W 0.2%...
Need help?
Do you have a question about the PID 10951 and is the answer not in the manual?
Questions and answers