Adjustment Of Pre-Set Time; Temperature Buttons And Illuminated Temperature Indicators; Indicator For Remaining Heat - Vorwerk Thermomix 31 Instruction Manual

Hide thumbs Also See for Thermomix 31:
Table of Contents

Advertisement

24
Instruction Manual Thermomix TM 31

Adjustment of pre-set time

The pre-set time can be changed at any time
during preparation. Press the "-" button to redu-
ce the time, press the "+" button to increase it.
If the speed selector gets turned to
before the pre-set time has expired, for exam-
ple in order to add another ingredient, the dis-
play will flash, indicating the current time, until
the appliance is switched on again. Food prepa-
ration can thus be continued without difficulty.
If you wish to stop the mixing procedure alto-
gether before the pre-set time has expired,
press both timer buttons simultaneously. This
will stop the display flashing and you may reset
the time. If no time has been pre-set the timer
will automatically be set to a maximum of 60
minutes when the speed selector is activated.
After this time, a buzzer will sound.
Temperature buttons and illuminated tempera-
ture indicators
The temperature buttons can be used to set a
temperature between 37°C and 100°C (99°F
and 212°F). Each button has a coloured indica-
tor lamp which will flash after the respective
button has been pressed:
37°C (99°F)
50°C and 60°C (122°F and 140°F)
70°C and 80°C (158°F and 176°F)
90°C, 100°C and
VAROMA (194°F and 212°F)
The illuminated temperature indicators are
points of reference.
Always ensure that none of the coloured indica-
tor lights is flashing if you do not wish to heat or
cook food. Otherwise, switch off the heating
function by pressing the
prevent unwanted heating of ingredients in the
mixing bowl if a time has been pre-set.
When the pre-set temperature has been rea-
/
ched during cooking the indicator lamp stops
flashing and changes to continuous mode.
The illuminated indicators show the temperatu-
re that has been reached during the heating pro-
cess. For example, if a temperature of 90°C
(194°F) is set the related light will start flashing.
As the Thermomix heats up the lights for 37°C,
50°C, 60°C, 70°C and 80°C (99, 122, 140, 158
and 176°F, respectively) light up one after the
other until 90°C (194°F) is reached. At this point
this light changes from flashing to continuous
mode. The illuminated temperature indicators
are only orientation values.
= green

Indicator for remaining heat

= yellow
If the mixing bowl is re-inserted into the applian-
= orange
ce while it is still warm the relevant light will
show its remaining temperature (only 1 lamp /
= red
continous mode).
No temperature for cooking and simmering can
be set unless a time has been pre-set.
Therefore please always proceed as follows:
Always start by setting a time, then choose the
temperature, followed by speed selection.
button. This will
4
3
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents