Advertisement
Quick Links
Compressor Supreme Force Feedback
1. Setting up
Compressor Supreme
1. Connect the gear shifter to the back panel of the steering wheel column.
2. Connect the foot pedals to the back panel of the steering wheel column.
3. Connect the A.C. adaptor jack to the back panel of the steering wheel column.
4. Ensure that your PlayStation 2/PSX is switched off. Connect the system jack to the controller
socket of your console. If it is going to connect PC, connect up the adapter first.
5. Switch on your console.
4.
To PlayStation 2/PSX
R2
L/L1
User Manual
3.
Gear "-" button
Fire buttons
Gear "+" button
R2 button
R1 button
Dual Shock 2 indicator
MODE, TEACH button
Direction buttons
START, SELECT button
Page 1
1.
2.
Foot pedals
Gear shifter
Gear shifter
Hand brake
Advertisement
Summary of Contents for Compressor Supreme Force Feedback
-
Page 1: User Manual
Compressor Supreme Force Feedback User Manual 1. Setting up Compressor Supreme 1. Connect the gear shifter to the back panel of the steering wheel column. 2. Connect the foot pedals to the back panel of the steering wheel column. 3. Connect the A.C. adaptor jack to the back panel of the steering wheel column. - Page 2 3. In PS2/PSX: Difference between operating modes When Dual Shock 2/Dual Shock mode (Red) is selected, for those games that are compatible to Dual Shock 2/Dual Shock controllers, the Compressor Supreme will interactively generate vibration to the games commands. In Digital Mode (Green), the steering acts more like a standard digital controller and not like an analogue controller.
- Page 3 Compressor Supreme Force Feedback User Manual If you need to program the configuration of your buttons, please follow the steps below: 5. Programming the Foot Pedals Foot Pedals are preprogramed already. Please check the setting in the previous section. 1. Identify the button that is used as the accelerator.
- Page 4 2. Press the „TEACH” button. The orange light will turn on. 3. Pull and hold the Hand Brake. 4. Press the button that was identified as the Hand Brake button. Compressor Supreme vibrates to indicate completion of programming. 5. Press the „TEACH” once to original operating mode..
- Page 5 2. Press the „TEACH” button. The orange light will turn on. 3. Hold the Gear Shifter either up, down, left or right. 4. Press the button that was identified as the Up Shift button. Compressor Supreme will vibrate to indicate completion of programming.
- Page 6 Joystick”. Then, select corresponding buttons for gear shift or other functions. 15. In some games, force feedback can be set to different degree of different type of force. For example, Collision, Road Grip, etc. Try these setting to get satisfactory force feeling.
- Page 7 User Manual 11. In Windows XP Just plug in the Compressor Supreme to your computer. Windows will detect and come up „New hardware is detected”. Then, install the HID driver according to instructions on dialog. If no pop up menu is when the device is plugged in. Please check the following issue.
-
Page 8: Specifications
Compressor Supreme Force Feedback User Manual 16. Mounting of Gear Shifter & Steering Wheel Use the G clamps provided to clamp the gear shifter and steering wheel onto the table if required. Simply sucking onto a smooth surface is ano- ther method.