Initial Settings - Panasonic DMR-EZ485V Quick Setup Manual

Connecting with an HDMI (High Defi nition Multimedia Interface) Cable
When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted,
enabling you to enjoy high quality, digital video and audio with just one cable. When connecting to an HDMI-
compatible HDTV (High Defi nition Television), the output can be switched to 1080p, 1080i or 720p HD video.
• Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover of the operating
instructions). It is recommended that you use Panasonic's HDMI cable.
• We recommend connecting to the TV with the DVD/VHS COMMON OUT terminals as well.
Cable from the wall/
antenna signal
RF IN
(Included)
RF
IN
RF
OUT
AC IN
VHF / UHF
(Included)
Set "HDMI Priority" and "HDMI Audio Output" to "On" (The default setting is "On".)
( page 65, 66 in the operating instructions).
For details on the benefi ts and limitations of different types of connections, please refer to pages 8 to
11, 70 to 72 in the Operating Instructions.
TM
VIERA Link
"HDAVI Control
What is VIERA Link "HDAVI Control"?
TM TM
VIERA Link is a new name for EZ Sync .
VIERA Link "HDAVI Control" is a convenient function that offers linked operations of this unit, and a
Panasonic TV (VIERA) or receiver under "HDAVI Control". You can use this function by connecting the
equipment with the HDMI cable.
For details on the benefi ts of "HDAVI Control", please refer to pages 40 to 41 in the Operating
Instructions.
TV
INPUT 1
AUDIO IN VIDEO
R L IN
HDMI IN
(Included)
(Included)
DVD/VHS COMMON OUT COMPONENT VIDEO OUT
AV OUT
HDMI
AV OUT DVD PRIORITY OUT
IN1
This unit
TM
"

Initial Settings

Preparing the TV
1
Turn the TV on.
2
Switch input to "AV input"etc.
3 Turn this unit on.
DVD/VHS
POWER
DVD/VHS DVD/VHS
POWER POWER
POWER
• When this unit is connected to a Panasonic
VOL VOL
DRIVE CH CH
TV/VIDEO
SELECT
TV (VIERA) supporting HDAVI Control 3
TRACKING/V-LOCK and initially set up, it automatically acquires
2 2 3 3
1 1
the TV setting information. For details,
CH CH CH
4 4 5 5 6 6
please refer to page 14 in the Operating
Instructions.
INPUT SELECT
8 8 9 9
7 7
4 Select an RF output
FAVORITE
DELETE DELETE 0 0
channel number.
RESET SLOW/SEARCH
SKIP/INDEX REW FF
STOP STOP PAUSE PAUSE PLAY PLAY
CH
TIME SLIP / JET REW CM SKIP
Connection (with Audio/
OK
Video cable)
Select "OFF".
SUB MENU RETURN RETURN
Connection (without HDMI
CREATE
AUDIO DISPLAY VCR/TV
CHAPTER
cable or Audio/Video cable)
A B
Select "CH3" or "CH4". If the
REC REC MODE F Rec STATUS
selection is appropriate, then the
step 5 screen will appear.
5 Select the language.
Select Language
Seleccione el idioma
Sélection de langue
• To return to the English
Español
previous screen Français
RETURN Press OK
Pulse OK
Appuyer sur OK
• If you make a mistake, press [RETURN].
6 Select the type of TV
you are using.
Aspect Ratio Selection
Select TV type and press OK.
(Please refer to Operation Instruction
for details)
4:3 TV
16:9 Widescreen TV
OK
Using your TV's
7
Set Quick Start to
remote control
"On" or "Off".
Quick Start Setting
The unit can be turned on faster, in about
1 second. Please note that Quick Start
mode slightly increases power
consumption when the unit is off.
(See Operation Instructions for details)
Turn Quick Start on ?
On
Off
OK
8 Select whether to receive
TV signal from the unit's
RF IN terminal or not.
• If you select "No"‚ you can proceed to
"Set Clock Manually" (step 10‚ below).
Automatic Clock and Channel Settings
Does this unit get its TV signal via RF IN?
Example:Antenna,Cable TV or Cable Box connected to the
unit's RF IN.
Yes
No
OK
9
Select "Antenna" or
"Cable".
Automatic Clock and Channel Settings
Please select the wire connected to RF IN.
Antenna
Cable
OK
Press [OK] to start automatic
clock and channel setting.
10
Complete the settings.
• If the correct time is displayed
Set Clock Automatically
Clock Setting completed successfully.
Select,
4/4/2008 12:15 AM
OK
DST............. On
Time Zone.... EST
Set
OK
• If the clock setting screen appears.
Set Clock Manually
Month Day Year Hour Minute
1 / 1 / 2000 SAT 12 : 00 AM
DST Time Zone
Off EST
OK
Select,
• Please refer to "Basic Operations"
(pages 15 to 22) in the operating
OK
instructions.
Set
Select,
OK
Set
Select,
OK
Set
Select,
OK
Set
OK
Select,
Next,
OK
Set