2
Remove screws from the rear of the TV. Be sure to store the removed screws in a safe
place, keeping them away from children.
3
Attach the Wall-Mount Attachment J (supplied with the TV) to the rear of the TV. Attach
the Attachment parts for Wall-Mount Bracket. Check the Attachment parts by referring to
"1" of the Wall-Mount Bracket Installation Guide.
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
• Be sure to store the unused parts in a safe place for future use. Retain this manual for future reference.
Standard mounting
Screw (+PSW 6 x 20)
Pulley
J
Soft cloth
Screw (+PSW 6 x 50)
Spacer (60 mm)
Belt
GB
15
GB