Advertisement

Quick Links

OPERATOR'S MANUAL
Operator's Manual
Read these instructions carefully and make sure you
understand them before using the BRAVO 65.
BRAVO 65 Blower
Model: 65-101
P/N 990020-1
Rev. 08/2009

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BRAVO 65-101 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ybravo BRAVO 65-101

  • Page 1 OPERATOR’S MANUAL BRAVO 65 Blower Model: 65-101 Operator’s Manual Read these instructions carefully and make sure you understand them before using the BRAVO 65. P/N 990020-1 Rev. 08/2009...
  • Page 2: I Ntroduction, Personal Safety

    fi nd a dealer close to you by searching the internet at: www.ybravo.com Ybravo.com, will willingly be of service and provide you with advice as well as help you to use your product both effi ciently and safely. Additional manuals are available at NO CHARGE and can also be obtained on the internet site.
  • Page 3: Registration Of The Product

    SERIAL No: ________________________ The blower model and serial number are critical in order to obtain the correct service parts. Ybravo.com has service parts available as listed in the spare parts list. All engine parts are available from Ybravo.com and through the Kawasaki engine dealer network.
  • Page 4: Table Of Contents

    Operator’s Manual at your own expense. The machine’s safety equipment ....5 The Ybravo.com Warranty requires that you return your blower General safety precautions ......to an authorized Kawasaki or Ybravo.com dealer for remedy General working instructions ......
  • Page 5: The Machine's Safety Equipment

    SAFETY INSTRUCTIONS General safety precautions 2. Vibration damping system IMPORTANT INFORMATION Your machine is equipped with a vibration damping system, - Never use the machine if you are tired, if you have drunk which is designed to give as vibration-free and comfortable alcohol, or if you are taking medication that could affect your use as possible.
  • Page 6: General Working Instructions

    SAFETY INSTRUCTIONS Fuel safety General working instructions Show consideration to persons in your surroundings by - Always use a fuel container with an anti-spill valve. avoiding using the machine at unsuitable times, such as late in the evening or early in the morning. Read through and follow - Never refuel the machine while the engine is running.
  • Page 7: What Is What On The Blower

    WHAT IS WHAT What is what on the blower? Muffl er/Spark arrestor screen Throttle control arm Spark plug Nozzle Choke 10. Blow tube Air fi lter 11. Throttle control Starter handle 12. Stop switch Fuel tank 13. Operator’s Manual Harness Assembly of the blower Connect the fl...
  • Page 8: Fuel Handling

    FUEL HANDLING Mixing WARNING - Always mix the gasoline and oil in a clean container intended approved for gasoline. Taking the following precautions will lessen the risk - Always start by fi lling half the amount of the gasoline to be of injury and property damage.
  • Page 9: Start And Stop

    STARTING AND STOPPING When starting Starting a cold engine Following the procedure for cold and warm engine start; - Press the machine body against the ground using your left Ignition: hand (NOTE! Not your foot). Set the stop switch to the - Grip the starter handle, slowly pull out the cord with your right “ON”...
  • Page 10: Maintenance

    MAINTENANCE Air Filter Muffl er The air fi lter should be cleaned regularly removing dust and The muffl er is designed to dampen dirt to avoid: the noise level and to direct the ex- haust fumes away from the user. - Carburetor malfunction The exhaust fumes are hot and can - Starting problems...
  • Page 11: Maintenance Schedule

    MAINTENANCE SCHEDULE Daily Maintenance Monthly Maintenance Clean the outside of the Clean the fuel tank. machine. Clean the carburetor and the Check that the throttle area surround it. control functions safely. Clean the air intake of the Check that the stop switch blower housing.
  • Page 12 MAINTENANCE SCHEDULE WARNING Accidental starting of the engine can cause injury. Always remove the spark plug cap before performing any service work to prevent acciden- tal starting. When starting the blower the machine should always be completely assembled. Maintenance Intervals First Every Every...
  • Page 13: Technical Data

    TECHNICAL DATA Technical data BRAVO 65 Engine Cylinder displacement, cm 64.7 Cylinder bore, mm 48.5 Stroke, mm Idle speed, rpm 2,500 Recommended max. speed 7,000 Max. engine output, acc. to ISO 8893, kW/ rpm 3.0kW / 8000 (4.1 HP ) Catalytic converter muffl...
  • Page 14 NOTES...
  • Page 15: Warranty Statement

    To obtain the benefit of this warranty, the product believed to be defective must be delivered to an authorized Ybravo dealer in a timely manner, no later than thirty (30) days from date of the operational problem or failure. The product must be delivered at the owner’s expense.

This manual is also suitable for:

Bravo 6565-101

Table of Contents