Cleaning; Emptying - Breville Brita Instructions For Use Manual

Cleaning

Always switch off and unplug your Hot Cup and allow it to completely cool
before cleaning. Never immerse the base unit, power cord or plug in water or
any other liquid. Do not use harsh abrasives, chemicals or oven cleaners.
Emptying your Hot Cup
1. Fill your Hot Cup with a quantity of water that just covers the perforated stainless
steel element cover.
2. Place a suitable cup or container below the dispensing nozzle. Set the dispense
control to the
3. Press the start button.
4. After the water has been dispensed, empty the cup and replace it under the
dispensing nozzle.
5. Press the start button again.
6. Discard the water.
Your Hot Cup is now empty.
If your Hot Cup will not be used for an extended period (e.g. if you are on holiday), we
recommend that you first empty it.
Before using your Hot Cup again, carry out several boil cycles discarding the water each
time.
Cleaning
Clean the exterior surface of your Hot Cup with a damp cloth and then polish it with a
soft, dry cloth. Do not use steel wool pads or harsh/abrasive cleaners.
10
setting.