Hardware Description; Installation Steps - Corega WLCBGMO User Manual

- User Manual

1.3 Hardware description

1.4 Installation Steps

Please confirm the following steps before installing the product.
Plug the product into the Cardbus slot  Put the Driver CD 
Install the utility program and the driver  Confirm the Device
status of the product Set up TCP/IP  Open the Utility
Program  Setup the Wireless Network  Enable the security
function  Setup the advanced functions  Start to use the
product.
1. Link LED
ON: network connected.
OFF: network disconnected.
2. Act LED
Indicates the connection status
Blink: transmitting or receiving
data
OFF: not transmitting or receiving
data
WLCBGMO Manual
3 3 3