D-Link DWL-3600AP Quick Installation Manual page 6

Solid Wall or Ceiling
Installation
1. Place the plastic wall mounting ring on a wall or ceiling.
2. Mark the points where you will insert the screws. Take out the mounting ring.
3. Drill holes in the marked points and insert the plastic wall anchors.
4. Use the supplied screws to attach the mounting ring to the wall.
Figure 3. Insert screws through mounting ring
5. Plug the CAT5 cable into the LAN port on the access point.
Figure 4. Plug cable into access point
6  D-Link DWL-3600AP Quick Install Guide