Daewoo DTQ-29U1SCV Service Manual page 12

4) WHITE BALANCE ADJUSTMENT(S8)
- Receive a good local channel.
- Enter the service mode and select service adjustment S8.
- You can see the OSD as shown in below.
R-GAIN
G-GAIN
B-GAIN
R-BIAS
G-BIAS
VWSELECT
- Using volume up or volume down, adjust service adjustment data of R-GAIN/G-GAIN/B-GAIN and
R-BIAS/G-BIAS until a good gray scale with normal whites is obtained.ALIGNMENT INSTRUCTIONS
5) DIGITAL PRESET(D.P) ADJUSTMENTS(S9)
SUBBRIGHTNESS ADJUSTMENT
- Receive a good local channel.
- Enter the service mode and select service adjustment S9.
- You can see the OSD as shown in below.
DP-Brightness
DP-Contrast
DP-Color
DP-Sharpness
VWSELECT
- Select DP-Brightness item, adjust DP-Brightness data value to obtain normal
brightness level.
DP-Contrast
- Fixed value = 10
DP-Color
- Fixed value = 5
DP-Sharpness
- Fixed value = 18
6) FACTORY OUTGOING MODE (S12 : FACT)
- If you select the S12, then the set becomes factory outgoing status.
- You can see the OSD ¡ SHIPPING OFF¡–
32 SRC R-BIAS
32 SRC G-BIAS
40 CVI R-BIAS
32 CVI G-BIAS
32
C BADJUST
10
10
5
18
C BADJUST
ALIGNMENT INSTRUCTION
32
32
-8
10
L EXIT
L EXIT
-11-