Advertisement
Quick Links
QUICK START GUIDE
THANK YOU FOR PURCHASING YOUR NEW EUREKA VACUUM!
Please take a few moments to read this Quick Start Guide. It is designed
to help you assemble your vacuum easily.
To view our "How to Assemble" demo, visit www.eureka.com/suctionseal/assembly
If you have questions about your new vacuum, please contact our
customer service helpline at
Helpline Hours:
8 a.m. to 7:30 p.m. (CST), Monday - Friday
10 a.m. to 6:30 p.m. (CST), Saturday - Sunday
STEP
What's in the carton
1 1
No screws
or tools
Dust
cup
required!
Important Safeguards
Vacuum cleaner
STEP
Easy assembly
2 2
1
Follow
1-11
in order
to ensure
proper
assembly.
Remove dust cup
to assemble vacuum.
6
To install hose connector,
align tab at right and
snap on at left.
STEP
How to use and clean your vacuum
3 3
Power
switch is
marked
for
I
on-off.
Pull out cord to desired length.
Do not pull past red line; push
cord into cord clip.
Air path
!
knob
Empty
dust cup
after
each use.
Attach tool to end of wand.
Turn air path knob to 'tools.'
1-800-282-2886
Carry handle
Handle
PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
Moving parts! Assemble the vacuum cleaner before using.
2
3
Place handle on
Slide carry handle into back of
vacuum; push down
handle. Snap into place.
to snap in place.
7
8
Pull out bottom of lower hose
Place hose over
retainer and position hose.
carry handle.
Air path
knob
To vacuum floors, turn
Use foot to adjust height for
air path knob to 'floors.'
carpet or bare floors.
Press switch to rewind cord.
Remove dust cup; press lever
to release bottom lid.
. We're here to help!
Hose
Dusting
brush
Turbo holder
Lower hose retainer
4
Snap!
A
Insert top tab A turbo holder into handle. Place thumbs on each side
and snap bottom corners B into place. Turn C knob to lock.
Store turbo nozzle in holder. Some models: Snap D turbo cover
straight on from front to back.
9
WAND
1
WAND
2
Some models:
Slip wand 2
over wand 1.
Brush roll on/off lever:
Turn brush roll lever on for
carpet; turn brush roll lever
off for bare floors and tools.
Pull filter latch to release cover. Lift out foam filter and shake off dust.
Lift out filter tube with screen; shake off dust. Reinstall filters and close cover.
AS1100-1109 Series
Available on some models
WAND
1 1
WAND
1
Crevice
tool
WAND
2
Wand 1
Wand 2
C
Lock!
B
D
Snap!
10
11
WAND
1 1
Push wand 1 onto end of
Store dusting brush and crevice tool on back
hose. Place over bottom
of vacuum. Store turbo nozzle in holder
hook; snap in at top.
Step on power switch to turn
on; step on again to turn off.
With cord rewind
SPECIAL FEATURES
Turbo nozzle
Turbo
cover
WAND
2 2
Stair Hose
Snap!
5
Place lower hose retainer
in slots on back of vacuum.
Push down to snap into place.
WAND
1
(tools vary by model).
Step on handle release to
lower handle into position.
Advertisement
