[16:9]
[14:9]
[Just]
[4:3]
Note
●
For HD signal in Digital TV, only [16:9] and [4:3 Full] are available.
●
For SD signal in Digital TV, only [16:9], [4:3], and [4:3 Full] are available.
●
Only [16:9] and [4:3] are available in PC input mode.
●
Aspect cannot be changed in 3D mode.
●
Aspect mode can be memorised separately for SD (Standard definition) and HD (High definition) signals except in
Digital TV.
Last view
Switch to previously viewed channel or input mode easily
●
Press again to return to the current view.
Note
●
Switching channel is not available while the recording of Timer Programming or One Touch Recording is in progress.
●
Watching less than 10 seconds is not regarded as the previously viewed channel or input mode.
Change OSD language
You can change language for on-screen displays.
1
Display the
menu
n
4
Select [OSD Language]
Language
OSD Language
select
access
Directly displays the image at 16:9
without distortion (anamorphic).
Displays the image at the standard
14:9 without distortion.
Displays a 4:3 image full-screen.
Stretching is only noticeable at the left
and right edges.
Displays the image at the standard 4:3
without distortion.
2
Select [Setup]
Setup
select
access
Access
[4:3 Full]
Displays a 4:3 image enlarged
horizontally to fit the screen.
●
For Digital TV or HD signal
[Zoom1]
Displays a 16:9 letterbox or 4:3 image
without distortion.
[Zoom2]
Displays a 16:9 letterbox (anamorphic)
image full-screen without distortion.
[Zoom3]
Displays a 2.35:1 letterbox
(anamorphic) image full-screen without
distortion.
At 16:9, displays the image at its
maximum (with slight enlargement).
3
Select [Language]
Language
Access
select
access
5
Select the language and set
OSD Language
English
中⽂
select
set
21