Before Installation - Freedom Pro Keyboard Quick Start Manual

Keyboard for smartphones

Hide thumbs

Table Of Contents

Table of Contents

Installing and connecting your Keyboard to a Windows Mobile Pocket PC

1) There are two methods you can use to install the drivers on your Pocket PC. These are:

Option A) Via the OTA (Over the Air) Website. This is the preferred method and requires an active

data connection on your Pocket PC.

Option B) Via your PC using the PC installation package. To download the latest PC driver

installation package please visit

2) When turning the keyboard on please select the following:

Pocket PC - HID Mode (Mode selection switch to the right)

3) Once the Drivers are installed you will need to perform a soft reset on your Pocket PC. This is normally

done by pressing the stylus into a recessed reset button. This will not affect any data on your Pocket PC.

4) A "Pocket PC" is a device running "Windows Mobile" and has a "Touch Screen". If you have a

Windows Mobile device without a Touch screen then you have a "Smartphone" (please see the

Smartphone installation instructions on page 14).

To install the drivers on your Pocket PC via the OTA (over the air) website please follow the instructions

below.

1) Open the internet browser on your Pocket PC and go to

2) When asked which keyboard you have, select Freedom Pro Keyboard.

3) The webpage will now detect which device you have and provide you with the link to the correct drivers

for your device. If the website is unable to detect which device you have, please select the correct drivers

for your device from the links it provides.

4) Make sure that the "Open file after download" check box is ticked and then click "Yes".

5) Once the file has finished downloading you will see the install screen. If you are given a message either

saying that this is from an unknown publisher or asking if you want to continue the installation click "Yes".

6) When given the option as to where you would like to install the drivers select "Device". Installing to a

memory card may stop the drivers from being able to function correctly. Click Install.

7) Once the Drivers are installed you will get a message saying that they were successfully installed on

your device. Click on OK.

8) Now perform a "soft reset" on your pocket PC (normally you will have a recessed reset button that you

press the tip of your stylus into). This will not affect any data on your Pocket PC.

9) Once your Pocket PC restarts your drivers will be installed.

If you do not have a data connection on your Pocket PC or would prefer to install the drivers via your PC

please visit

www.freedominput.com