Napa 6-787 User Manual page 2

FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY.
THIS INSTRUCTION MANUAL CONTAINS
IMPORTANT SAFETY INFORMATION.
READ THIS
INSTRUCTION MANUAL
CAREFULLY AND
UNDERSTAND ALL
INFORMATION
OPERATING THIS TOOL.
• Always operate, inspect and maintain
this tool in accordance with American
National Standards Institute Safety Code
of Portable Air Tools (ANSI B186.1) and
any other applicable safety codes and
regulations.
• For safety, top
performance and
maximum durability of
parts, operate this tool
at 90 psig/6.2 bar max
air pressure with 3/8"
diameter air supply hose.
• Always wear impact-
resistant eye and face
protection when
operating or performing
maintenance on this
tool. Always wear
hearing protection
when using this tool.
• High sound levels
can cause permanent
hearing loss. Use
hearing protection as
recommended by your
employer or OSHA
regulation.
• Keep the tool in efficient operating
condition.
• Operators and maintenance personnel
must be physically able to handle the
bulk, weight and power of this tool.
PLEASE REVIEW ALL WARNING INSTRUCTIONS PRIOR TO OPERATION. SAVE THIS MANUAL FOR FUTURE REFERENCE.
2
6-787_Manual_100705.indd 2
• Air under pressure can
BEFORE
• Air powered tools can
• Place the tool on the work before
starting the tool. Do not point or
indulge in any horseplay with this tool.
• Slipping, tripping and/or
• Keep body working stance balanced and
firm. Do not overreach when operating
the tool.
• Anticipate and be alert for sudden
cause severe injury.
Never direct air at
yourself or others.
Always turn off the air
supply, drain hose of
air pressure and detach
tool from air supply
before installing,
removing or adjusting
• Tool shaft may continue to rotate
any accessory on this
tool, or before
performing any
maintenance on this
tool. Failure to do
so could result in injury.
Whip hoses can cause
serious injury. Always
check for damaged,
frayed or loose hoses
and fittings, and replace
immediately. Do not use
quick detach couplings
at tool. See instructions
for correct set-up.
vibrate in use. Vibration,
repetitive motions or
uncomfortable positions
over extended periods of
time may be harmful to
your hands and arms.
Discontinue use of tool
if discomfort, tingling
feeling or pain occurs.
Seek medical advice
before resuming use.
• Do not lubricate tools with flammable
• Do not force tool beyond its rated
falling while operating
air tools can be a major
cause of serious injury
• Do not remove any labels. Replace any
or death. Be aware of
excess hose left on the
walking or work surface.
• Use accessories recommended by NAPA
changes in motion during start up and
operation of any power tool.
• Do not carry tool by
the hose. Protect
the hose from sharp
objects and heat.
briefly after throttle is released. Avoid
direct contact with accessories during
and after use. Gloves will reduce the
risk of cuts or burns.
• Keep away from
rotating end of tool.
Do not wear jewelry or
loose clothing. Secure
long hair. Scalping can
occur if hair is not kept
away from tool and
accessories. Choking
can occur if neckwear
is not kept away from
tool and accessories.
• Drill bits can bind
suddenly and cause
rotation of the work
piece or tool, causeing
injury to arms and/or
shoulders. Enough
torque is generated
to cause falls. Always
use sharp bits. Use less
downward pressure
at breakthrough.
or volatile liquids such as kerosene,
diesel or jet fuel.
capacity.
damaged labels.
Professional Air Tools.
Rev. 08/30/05
10/7/05 8:16:25 AM