Download Print this page

Home Fires REAL FLAME Owner's Manual

Gas coal and gas log fires using natural gas and automatic ignition installation & operating instructions

Advertisement

Quick Links

Installation & Operating Instru c t i o n s
For REAL FLAME
Please read these instructions carefully before you begin to install this gas coal/log set.
NOTE: Installer should leave these instructions with the customer for future reference.
This fireplace gas coal/log set is for use with
Installation and all repairs must be perf o rmed by an individual who is experienced in the installation, re p a i r,
and servicing of vented gas coal/log sets.
THE FIREPLACE CHIMNEY MUST HAVE A PERMANENT VENT OPENING TO AT M O S P H E R E .
Do not burn wood or other material in any fireplace fitted with a gas coal/log set.
A fireguard should be used with this appliance for the protection of children and the elderly.
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE LIQUIDS
IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.
Young children are not allowed to operate this unit, and should be supervised
O W N E R S M A N U A L
Gas Coal And Gas Log Fires Using Natural Gas and Automatic Ignition
®
W A R N I N G
FOR INSTA L L ATION IN A VENTED FIREPLACE ONLY.
KEEP DAMPER WIDE OPEN WHEN IN USE.
F O R
Y O U R
when they are in the same room with the appliance.
Do not use this appliance or any part that has been under water.
F O R
Y O U R
W H AT TO DO IF YOU SMELL GAS:
Open Windows
Do not try to light any appliances
Do not touch any electrical switch; do not use any phone in your building
Immediately call your gas supplier from a neighbor's phone
Follow the gas supplier's instructions
If you cannot reach your gas supplier, call the fire department.
NATURAL GAS ONLY.
S A F E T Y
S A F E T Y

Advertisement

loading
Need help?

Need help?

Do you have a question about the REAL FLAME and is the answer not in the manual?

Questions and answers

Summary of Contents for Home Fires REAL FLAME

  • Page 1 O W N E R S M A N U A L Installation & Operating Instru c t i o n s For REAL FLAME Gas Coal And Gas Log Fires Using Natural Gas and Automatic Ignition ® Please read these instructions carefully before you begin to install this gas coal/log set.
  • Page 2 GENERAL INFORMATION B. Prior to connecting the gas coal/log set, make sure the gas supply is completely shut off. 1. This gas coal/log set is only to be installed and used in a fully vented fireplace with a completely C. Prior to installation, a smoke test should be per- functional damper and chimney that is free of any formed using a smoke pellet.
  • Page 3 PILOT ASSEMBLY CONTROL VALVE t h e re is a definite click. Check that a spark is pro d u c e d If the pilot goes out, repeat the above steps. between the pilot burner and the piezo electro d e . Once the pilot is lit, rotate the knob from the Connecting gas supply to Burner Pan to the large...
  • Page 4 O F F p o s i t i o n . The burner and the pilot will extinguish completely. C e rt i fi ed by RADCO America’s Exclusive Distributor of Real Flame ® P ro d u c t s...