Advertisement

Quick Links

TritonEQ
offers all of the specifi cations and features of the original Triton Jr., and adds a built-in AC power supply,
lithium balancing circuit, and a new reversed LCD with adjustable view angle. The range of currents and cell counts
make TritonEQ great for smaller sized electric fl ight applications. But it can still be used in various other applications,
such as for Tx and Rx batteries, fi eld batteries, and more. TritonEQ can charge, discharge, and cycle multiple types
of rechargeable batteries with high output power. A Quick Reference Guide, plus state-of-the art programming and
fl owcharts make TritonEQ easy to understand and use. Its very small size and light weight make TritonEQ extremely
easy to transport.
It is strongly recommended to completely read this manual before use! Damage resulting from misuse
or modifi cation will void your warranty.
WARNING!! Charging lithium-based rechargeable batteries poses a risk of FIRE! NEVER treat
lithium-based batteries in the same manner as other battery types. NEVER leave lithium batteries
unattended while being charged! ALWAYS charge lithium-based batteries in a fi reproof location!
Failure to follow all care and handling instructions contained in this manual could result in quick,
severe, permanent damage to the batteries and all surroundings!! Follow all safety precautions
when using such batteries, as listed on pages 9-12 of this manual!
1. Connect TritonEQ to the AC or DC input power source. (See page 3 for details)
2. Find the programming fl owcharts included in the package.
3. Press BATT TYPE to fi nd the screen which matches your battery type. (See page 5 for details)
4. Connect the proper charge adapter to the "Output" jacks. Connect the battery to the charge lead, observing proper polarity.
5. To charge:
a. For NiCd and NiMH batteries see page 5.
b. For lithium based batteries see page 11.
c. For lead-acid (Pb) batteries see page 12.
6. To discharge:
a. For NiCd and NiMH batteries see page 7.
b. For lithium based batteries see page 12.
c. For lead-acid (Pb) batteries see page 13.
7. For cycling of NiCd and NiMH batteries see page 8.
Specifi cations .........................................................................2
Special Features and Functions ...........................................2
Important Warnings ................................................................2
Glossary of Terms ..................................................................3
Charger Controls and Output Connections .........................4
Getting Started - Main Menu .................................................5
Charging NiCd or NiMH Batteries .........................................5
Discharging NiCd and NiMH Batteries .................................7
Cycling NiCd and NiMH Batteries .........................................8
Lithium-Polymer Batteries .....................................................9
INTRODUCTION
QUICK REFERENCE GUIDE
INDEX
Balanced vs. Non-balanced Lithium Packs ........................10
Charging LiPo, Li-Ion, or LiFe Batteries .............................11
Charging Pb (Lead-Acid) Batteries .....................................12
Discharging Pb Batteries .....................................................13
Miscellaneous Functions .....................................................13
Heat Ventilation .....................................................................15
Errors Indications and Safety Features ..............................15
Troubleshooting Guide ........................................................15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TritonEQ and is the answer not in the manual?

Questions and answers

Summary of Contents for GREAT PLANES TritonEQ

  • Page 1: Table Of Contents

    LCD with adjustable view angle. The range of currents and cell counts make TritonEQ great for smaller sized electric fl ight applications. But it can still be used in various other applications, such as for Tx and Rx batteries, fi eld batteries, and more. TritonEQ can charge, discharge, and cycle multiple types of rechargeable batteries with high output power.
  • Page 2: Specifi Cations

    SPECIFICATIONS AC input voltage: 110V 60Hz – 240V 50Hz Lithium balancing accuracy: 5mV per cell (detachable AC cord) Lithium balancing connector: FlightPower and ElectriFly DC input: 11-15.0V DC, with large adapters included alligator clips Lithium max. node current: 300mA Number of outputs: one, banana jacks Discharge current: 0.1-1.0A (5W max)
  • Page 3: Glossary Of Terms

    TritonEQ has a maximum overall power rating of 63 watts with DC input, and 50 watts with AC input. If charging a battery with high voltage at high current, or if the input voltage is low, the charger might limit the output current as a result of the charger’s maximum power rating.
  • Page 4: Charger Controls And Output Connections

    Failure to do so could result in permanent damage to the battery and/or the charger and void your warranty. Great Planes offers a large variety of charge leads which can be found at most hobby retailers nationwide: Part Number...
  • Page 5: Determining Battery Type And Specifi Cations

    (0.1 – 5.0 amps). See the chart on the next page for recommended current settings. Note that “0.1A” is the same as 100mA… “0.8A” is the same as 800mA, etc. Press ENTER, or wait 5 seconds and TritonEQ will...
  • Page 6 4. To START PEAK CHARGE, press and hold ENTER for 2 seconds. “BATTERY CHECK, PLEASE WAIT…” will show briefl y as TritonEQ evaluates the condition of the battery. If the battery is ready, the charge process will start automatically at which time you’ll see a screen like shown below.
  • Page 7: Discharging Nicd And Nimh Batteries

    16.8 15.4 seconds. “BATTERY CHECK, PLEASE WAIT…” will show briefl y as TritonEQ evaluates the condition of the battery. *Cutoff volts based on 1.1V/cell for NiCd/NiMH If the battery is ready, discharge will start automatically at which time you’ll see a screen like shown below.
  • Page 8: Cycling Nicd And Nimh Batteries

    6. To START CYCLING, press and hold ENTER for 2 seconds. “BATTERY CHECK, PLEASE WAIT…” will show briefl y, and TritonEQ will start cycling if the battery is in suitable condition, at which time you’ll see a screen like shown on the...
  • Page 9: Important Care And Handling Instructions For Lithium-Polymer Batteries

    7. When all cycling is fi nished, “END” will show on-screen. Press BATT TYPE to see the DATA VIEW screens for all cycling data (go to page 14). Note that TritonEQ will only show data for the last cycle (not all cycles). If set to cycle 4 times, only data for cycle 4 will be viewable (not for cycles 1, 2, or 3).
  • Page 10: Selecting Lipo, Li-Ion Or Life Battery Types

    While similar in many ways, there are some slight differences amongst these battery types. Setting TritonEQ for the proper lithium type is necessary for safety, and will result in better performance for your packs. Refer to the Lithium Menu fl owchart included to set the specifi c type of lithium battery: 1.
  • Page 11: Charging Lipo, Li-Ion, Or Life Batteries

    TritonEQ automatically sets the charge current based on the battery’s 1C rating. For example, if a capacity of 600mAh is entered TritonEQ will set the charge current at 0.6A (600mA). For a capacity setting of 2500mAh, the charge current will be set to 2.5A (2500mA), etc.
  • Page 12: Discharging Lipo, Li-Ion, Or Life Batteries

    5. When discharge is fi nished, the screen will show “END” and tones will sound for 10 seconds. The battery can now be re-charged, or disconnected from the charger. TritonEQ will display details about the discharge data for your battery including discharge capacity, discharge time, etc.
  • Page 13: Discharging Pb Batteries

    Safety Timer: A backup timer is built-in to protect the charger for safety purposes. If TritonEQ does not properly identify a battery having reached full charge, this timer will automatically stop fast charge to prevent any damage from occurring due to overcharge.
  • Page 14: Data View Screens - Charge, Discharge And Cycle Data

    DATA VIEW SCREENS – CHARGE, DISCHARGE AND CYCLE DATA TritonEQ keeps track of data which can be viewed after any charge, discharge, or cycle function has ended. There are 2 ways to access this menu. While a charge, discharge, or cycle function is in progress, or after any such function has ended, press BATT TYPE to fi...
  • Page 15: Heat Ventilation

    Solid-state circuitry protects the charger against potential damage which could be caused by short-circuit or reverse polarity conditions. If power is connected backwards to TritonEQ’s input, the screen may turn black and no other operation will occur, but it will be protected from damage. Re-check all input connections to make sure it is connected properly.
  • Page 16: 1-Year Limited Warranty - U.s.a. And Canada Only

    1-YEAR LIMITED WARRANTY – *U.S.A AND CANADA ONLY Great Planes warrants this product to be free from defects in materials and workmanship for a period of one (1) years from the date of purchase. During that period, Great Planes will, at its option, repair or replace without service charge any product deemed defective due to those causes.
  • Page 17 ElectriFly TritonEQ LiPo (Li-Ion or LiFe)
  • Page 18 Cycling: Press ENTER to select value. Press INC+ or DEC- to adjust value. Repeat for each value including cycle count. Press ENTER or wait 5 seconds to set new values. Cycling: Press ENTER to select value. Press INC+ or DEC- to adjust value.
  • Page 19 Cycling: Press ENTER to select value. Press INC+ or DEC- to adjust value. Repeat for each value including cycle count. Press ENTER or wait 5 seconds to set new values. Cycling: Press ENTER to select value. Press INC+ or DEC- to adjust value.
  • Page 20 • When battery type is selected as “LiFe”, default voltages will be 3.3V per cell nominal, and 3.60V maximum.

Table of Contents