Advertisement
Cleaning
and maintenance
First disconnect the plug fmm electrical outlet drain the hot water completely
and clean out after' the bOdy cools down.
Lid and main unit
_______
•••• "' __
r."'ITlM"'s.'·M"'C~"_.,,_*'.
".,,~"""""'''''''.
_
With dirt off with soft dry cloth.
Inner pot
~
wash/wipe with sponge
inner
covered with scale
While you are using this unit, minerals dissolved in the water can get stuck on the
linner pot.
This is call scaling,and iUs not harmful
To maintain the pot's performance, clean the pot once every three months by
using citric acid
How to clean the
with citric acid
Due to the impurity in water, there may be some discolouring of steel surface.
Remove discolouring thmugh pmcedures below.
1.Filllemon water to the"full water"mark.
2.80il it and keep it in the pot for about an hour,Then empty jar and clean it with
a soft cloth.
3.To remove taste, boil water again and pour it out. Repeat procedure until
taste is gone.
Do not wipe off dirt with soap powder,scrubbing-brush,solvent
grind
powder·,etc.
Do not splash or imerse the body or electric component with water to
avoid getting an electric shock.
6
1
Advertisement
