Summary of Contents for nemesysco LVA-i
- Page 1 Release: 1 Date: April 2008 USB handset installation 6 Hagavish St. POB 8747 Sapir Industrial Natanya, Israel 42504 | Tel: +972-9-885-3864 | Fax: +972-9-885-3782 | www.nemesysco.com...
- Page 2 LVA-i handset installation Your LVA-i is supplied with a new model of handset. This handset is a crucial component of the system that enables the LVA-i full control over the voice capturing and its quality. The new handset model has an integrated sound card within. This enables the LVA-i to ensure that no matter what type of hardware &...
-
Page 3: Connecting The Handset
Click the “OK” button when the setting is done. The window will close. Launch LVA-i and perform a sound test (see later in this document). Page 3... - Page 4 Make sure the handset is not connected prior to installing the device driver. The device driver is supplied to you with the LVA-i install CD under the directory VISTA \ CMEDIA The driver can also be downloaded from the Internet: www.nemesysco.com/~upload/CMEDIA.zip...
- Page 5 LVA-i handset installation Installation will commence. When the installation finishes, it will ask you to restart the PC. Click “Finish” and let the installation restart the PC. Keep the handset connected to the PC. When Vista starts up again, you will notice a new icon in the tray bar, indicating the new device driver is active.
- Page 6 Click OK to close the window. Click the “Playback” tab to confirm that the USB audio device is set as the speaker as well. Launch LVA-i and perform a quick sound test (see later in this document). Page 6...
- Page 7 LVA-i handset installation If needed, you can increase or decrease the handset’s microphone and speaker volume by following the steps above. Sound Test In order to ensure proper voice input, it is recommended to perform a sound test before each test session.
Need help?
Do you have a question about the LVA-i and is the answer not in the manual?
Questions and answers