Attach The Rear Assembly To The Body - Volkswagen KT1134WM Owner's Manual

ATTACH THE REAR ASSEMBLY TO THE BODY

❶ Carefully turn the vehicle body over so the underside is
facing up. Figure 3.3
❷ Align the tabs coming from the rear body assembly with the
slots on the back of the vehicle body.
❸ Slide the two pieces together, making sure the holes in the
rear assembly are aligned with the holes in the vehicle body.
1
❹ Insert a screw into each hole location (eight total) and
❺ Insert a screw into each of the rear bracket hole locations
3
2
Figure 3.3
tighten the screws into the vehicle body. Figure 3.4
(two total), and tighten the screws into the vehicle body.
Two screws needed on
each side of rear body.
Four screws needed in
the middle of the rear body.
4
4
Two small
screws needed
for rear bracket.
4
4
4
5
4
4
4
Figure 3.4
9