Page 1
IMPORTANT INSTRUCTIONS & OPERATING MANUAL Houston 50 Inch Electric Wall Mounted Fireplace Black / White Model Number:MFE5050BK Model Number:MFE5050WH Read these instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and / or property damage.
GENERAL SAFETY INFORMATION When using this fireplace, basic precautions should always be taken to reduce the risk of fire, electric shock and injury to persons, including the following: CAUTION – Due to the high temperature, keep electrical cords, drapery and other furnishings at least 3 feet from the front, side and rear of the fireplace.
Page 3
23. Faulty wall outlet connections may cause the wall outlet to overheat. Be sure that the fireplace plug properly fits into the outlet before each use. During use, make sure the fireplace plug does not overheat. If necessary, have a qualified electrician check and / or replace the wall outlet. 24.
Page 4
Sr. No Item Description Quantity Carton Foam Protection (Left Bottom) Electric Fireplace Foam Protection (Left Top) Mounting Screws and Wall Plugs ST5x40 Instruction Manual Remote Control Foam Protection (Right Top) Cable Plug Foam Protection (Right Bottom) Helpful Advice Before Installation ...
Page 5
Tools Needed Power drill Screwdriver Installation Do not connect the fireplace to the power supply until properly fixed to the wall and the instructions are carefully read. Make sure the area to be drilled does not have any hidden electrical wires or water and gas pipes.
Page 6
Step Two Make sure the area to be drilled does not have any hidden electrical wires or water and gas pipes. The wall fixings provided is for concrete walls only; please use suitable fixings for your wall type. If in doubt, contact a qualified hardware expert.
Page 7
Turning On Plug the fireplace into a power outlet. Turn on the power switch which is located on the right side of the fireplace. Description of Control Panel Description of Remote Control...
Power Switch Plug the fireplace into a power outlet. The fireplace is now in Standby mode. Press the button once to turn on the fireplace and flame effect. An indicator light will light up to indicate that the function is on. This will also turn on the flame effect. ...
Page 9
Cleaning & Maintenance Disconnect from the power supply before attempting any maintenance or cleaning in order to reduce the risk of fire, electric shock to persons or damage to property. Warning - Always disconnect from the power supply before cleaning fireplace. ...
Need help?
Do you have a question about the MFE5050BK and is the answer not in the manual?
Questions and answers