1200 Plaster Mixer Safety Instructions - Western 1200 Operator's Manual & Parts Breakdown

1200 PLASTER MIXER SAFETY INSTRUCTIONS

The following safety instructions are for the benet of the contractor and the equipment operators� These
instructions should be followed at all times and the contractor should make sure the operators are fully trained
and have read these safety instructions�
1� Do not operate or service this equipment before reading the operating and maintenance instruction
manual or serious injury may result�
2� Stop the engine if leaving the machine unattended�
3� If the machine jams, disengage the clutch immediately� Turn engine o before attempting to dislodge
the jammed object�
4� Keep the equipment properly maintained� Poorly maintained equipment can be unsafe�
5� Stop engine and allow engine to cool down before attempting to service the engine or add fuel�
6� Keep hands and objects out of the mixing barrel when the engine is running whether or not it is in
gear�
7� Do not operate this equipment unless all guards and safety grates are attached and in place�
8� Never attempt any repairs while the engine is running�
9� Chock wheels if parked on a slope�
Return to Table of Contents
1200 PLASTER MIXER SAFETY INSTRUCTIONS
3