Please call (888) 222-5487 for technical assistance. Disclaimer ULTRA will be not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing.
Specifications Type Specification Color Black / Black Coating inside Chassis or White/ White Coating Inside Chassis Dimension 520(L) x 195(W) x 476(H) mm Material SGCC Steel / ABS / Mesh M/B Type ATX / Micro-ATX I/O Panel USB3.0 x 1 USB2.0 x 2 Mic / HD Audio / 97 Audio 5.25”...
Accessories Use For QT’y Figure Stand-off for M/B (Main Board) Screws for Power Supply Screws for M/B Stand off socket for M/B Screws for Fans Screws for Securing Lockplate Lockplate for Anti-Theft Straps for Cable Management Tool-less Clips for 3.5” Hard Drive Tool-less Clips for 2.5”...
Side Panel Disassembly Remove the screws securing the side panels. Slide the side panel to remove it. 5.25” Device Installation Push the button on the front panel Pull the tool-less drive bay clip. Insert the 5.25” device. Push the tool-less drive bay clip cover and pull to remove the cover.
3.5” Device Installation 2.5” Device Installation Place the 3.5” tool-less clips onto the Slide the 3.5” device into Place the 2.5” tool-less clips onto the Slide the 2.5” device into the drive 3.5” device in the proper location. the drive bay. 2.5”...
Motherboard and Graphics Card Installation Install the motherboard in the Remove PCI slot brackets. Pull open the graphics card stabilizer. proper location. Install graphics card. Close the graphics card stabilizer. Adjust the graphics card stabilizer. (a) When using slots 2 and 3, use the upper portion of the graphics card stabilizer.
Source de Courant est vendu séparément. Vérifiez que le cordon d'alimentation est débranché avant de tenter l'installation. Pour des performances optimales, nous vous recommandons d'installer une source de courant ULTRA® (vendu séparément). Pour plus d'informations, s'il vous plaît visitez www.ultraproducts.com.
Page 12
Specifications Type Specification Color Black / Black Coating inside Chassis or White/ White Coating Inside Chassis Dimension 520(L) x 195(W) x 476(H) mm Material SGCC Steel / ABS / Mesh M/B Type ATX / Micro-ATX I/O Panel USB3.0 x 1 USB2.0 x 2 Mic / HD Audio / 97 Audio 5.25”...
Accessories Figure Use For QT’y Stand-off for M/B (Main Board) Screws for Power Supply Screws for M/B Stand off socket for M/B Screws for Fans Screws for Securing Lockplate Lockplate for Anti-Theft Straps for Cable Management Tool-less Clips for 3.5” Hard Drive Tool-less Clips for 2.5”...
Page 15
Side Panel Disassembly Remove the screws securing the side panels. Slide the side panel to remove it. 5.25” Device Installation Push the button on the front panel Pull the tool-less drive bay clip. Insert the 5.25” device. Push the tool-less drive bay clip cover and pull to remove the cover.
Page 16
3.5” Device Installation 2.5” Device Installation Place the 3.5” tool-less clips onto the Slide the 3.5” device into Place the 2.5” tool-less clips onto the Slide the 2.5” device into the drive 3.5” device in the proper location. the drive bay. 2.5”...
Page 17
Motherboard and Graphics Card Installation Install the motherboard in the Remove PCI slot brackets. Pull open the graphics card stabilizer. proper location. Install graphics card. Close the graphics card stabilizer. Adjust the graphics card stabilizer. (a) When using slots 2 and 3, use the upper portion of the graphics card stabilizer.