Table of Contents
Advertisement
Temporary Versus Permanent Hold
A temporary hold can be set when operating in any mode except for OFF. A
temporary hold is set by pressing the
desired temperature. The SET AT indication of the temperature setpoint will
change to HOLD AT and a message will appear in the thermostat messaging
display area to confirm that a temporary hold is set. A temporary hold setpoint
will be maintained until the start of the next programmed time period or the
RUN soft key is pressed.
A permanent hold can be set when operating in any mode except for OFF. To
set a permanent hold, change the temperature just like setting a temporary
hold. When the desired setpoint is entered, the user will have five seconds to press the PERM HOLD soft key to convert
the temporary hold into a permanent hold. The SET AT by the setpoint will change to HOLD AT and a message will
appear in the thermostat messaging display area to confirm that a permanent hold is set. If the PERM HOLD soft key is
not pressed within five seconds, the hold will remain a temporary hold.
A permanent hold setpoint will override the programmed setpoints and time periods and can only be ended by pressing
the RUN soft key.
Energy Wise Rewards Conservation Period Details
The following are detailed descriptions of the Energy Wise Rewards conservation periods.
1. Control Event Pending
The phrase Control Event Pending will appear in the message
rotation at the top of the home screen before an Energy Wise Rewards
conservation period is set to begin. The LED on the Action button (
will flash until the event begins.
2. Event in Progress
When an Energy Wise Rewards conservation period is in progress, the
phrase Event in Progress will be displayed in the message rotation
at the top of the home screen. The LED on the Action button (
maintain a steady light for the duration of the event.
Delmarva Power Web-Programmable Thermostat Homeowner's Manual
or
on the thermostat to adjust the
)
) will
15
Hide quick links:
Advertisement
Table of Contents
