Sony Bravia KDL-42W670A Operating Instructions Manual page 25

2
Decide on the installation location of your
TV. Tape the Paper Template to the wall.
3
Make six holes according to the numbering
(1, 2, 3, 4, 5 and 6) on the Paper Template
using an electric drill.
5, 6
4
Peel the Paper Template from the wall.
Wall
Paper
Template
1, 2, 3, 4
5
Install screws (8 mm in diameter, not
supplied) to the Wall-Mount Base and AC
Adapter Holder on the wall.
AC Adapter Holder
Preparing for the
installation of the TV
1
Remove the screws from the rear of the TV.
Be sure to store the removed screws in a
safe place, keeping them away from
children.
Soft cloth
~
• When removing the Table-Top Stand from the
TV, lay the display face down on a stable work
surface that is larger than the TV.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on the
work surface.
• Once the Stand Necks are detached from the
Stand, be sure to keep the Stand Necks and
screws in a safe place.
• When attaching the Table-Top Stand again, be
sure to fasten the screws (previously removed)
to the original holes on the rear of the TV.
Wall-
Mount
Base
(Continued) 25
GB
GB