Displaying Disc Information; Setting The Clock; Use Your Player As An Alarm Clock - LG XD123-A User Manual

XD123_63-D0U_ENG_DG_0120 6/24/08

Displaying Disc Information

1. Press :
2. Select a item :
3. Adjust the Display menu settings :
4. To return the exit :
Displaying Disc Information - more you can do
You can select an item by pressing vV and change or select the setting by
pressing b B.
Current title (or track)
number/total number of titles (or tracks)
Current chapter number/total number of chapters
Elapsed playing time
Selected audio language or channel
Selected subtitle
Selected angle/total number of angles
Selected Sound mode
Symbol Used in this Manual
All discs and file listed below
DVD and finalized DVD±R/RW
DivX files
12 12 DVD Micro Hi-Fi System ] USER GUIDE
5:47 PM Page 12
ON REMOTE
DISPLAY
v v V V
b b B B
DISPLAY
ALL MP3
MP3 files
DVD
WMA
WMA files
DivX ACD
Audio CDs

Setting the Clock

ON PLAYER
1. Turn the power on:
2. Press for at least 2 seconds:
3. Choose from either:
AM 12:00 (for an am and pm
display) or 0:00 (for a 24 hour
display)
4. Confirm your selection:
5. Select the hours:
6. Press:
7. Select the minutes:
8. Press:

Use your player as an alarm clock

Press and hold TIMER for two seconds. Each function, DVD/CD,USB
TAPE,TUNER flashes for two seconds. Press SET when the function you
want to be woken by is showing.
If you choose TUNER, "PLAY" and "REC" flashes in the display window
alternately. Choose one of them by pressing the SET and then, select the
preset using . . or > > and press SET.
If you choose DVD/CD,USB or TAPE you will be shown below.
You will be shown the "ON TIME" display. This is where you set the time
you want the alarm to go off. Use or
. .
minutes and SET to save. You will then be shown the "OFF TIME" dis-
play. This is where you set the time you want the function to stop. Use
or to change the hours and minutes and press SET to save.
. . > >
Next you will be shown the volume (VOL) you want to be woken by.
Use . . or > > to change the volume and SET to save. Switch the sys-
" "
tem off. The clock icon shows that the alarm is set.
When the system is turned off you can check the time the alarm is set for
by pressing TIMER. You can also turn the alarm on and off by pressing
TIMER. To set the alarm to go off at a different time, switch the system on
and reprogramme following the same steps as initially.
ON REMOTE
I
1 1 / /
1 1 POWER
CLOCK
or
. . > >
SET
. . or > >
SET
or
. . > >
SET
to change the hours and
> >