Do you have a question about the Aqua Pour and is the answer not in the manual?
Questions and answers
Tina
April 10, 2025
The ceramic filter won't let any water through, we left it for over 10 hours and nothing. Why is this happening?
Also, where do I buy replacement parts? Is this product discontinued?
1 comments:
Mr. Anderson
May 14, 2025
The ceramic filter of the Nikken Pour may not allow water to pass through because it takes a long time for water to get through it naturally. If it becomes discolored, it may be partially clogged. In that case, washing it well with water and lightly scrubbing it can help restore flow.
Page 1
NIKKEN ® Aqua Pour ™ gravity water system OPERATING MANUAL/GUIDE D’UTILISATION...
Page 2
This product is designed to remove objectionable tastes, odors and colors from municipally treated tap water. When the PiMag Aqua Pour is fully assembled, do not attempt to carry or move it. To fill the Aqua Pour, use a pitcher or other container, as shown in the instructions.
Cause: Poor water quality or filters need replacing. Solutions: (1) Check quality of water used in system. (2) Clean or replace microsponge filter. (3) Replace filter cartridge. Visit the Aqua Pour Web site at www.e-nikken.com/aqua_pour for more information and FAQs.
Page 4
COMPONENTS COVER (A) MICROSPONGE FILTER (B) OPTIONAL FILTER (P) WATER FILL TANK (C) CERAMIC FILTER PLATE RING SEAL (D) WASHER FILTER PLATE (E) FILTER ADAPTER FILTER RING SEAL (F) FILTER RING SEAL FILTER CARTRIDGE (G) WATER TANK COVER (H) WATER SUPPLY TANK (I) MINERAL STONES (J) WATER TAP (K) TAP RING SEAL (L)
Page 5
• Your Nikken PiMag Aqua Pour Gravity Water System is now ready for use. Fill the water fill tank again and place the cover (A) on the unit.
Cartridge life will vary, depending on amount of use and water quality. See the recommended replacement intervals in the Specifications section. REPLACEMENT PARTS The following replacement parts may be ordered from Nikken Inc. Microsponge Filter #1362 Ceramic Filter #1364...
Page 7
« l’eau de la vie. » Nikken offre en exclusivité les produits d’eau PiMag. Le PiMag Aqua Pour offre le confort inégalé de l’eau PiMag partout, quels que soient le lieu ou le temps. Aucun besoin de branchements électriques ou de travaux de plomberie, le concept d’opération est basé...
Page 8
COMPOSANTS COUVERCLE FILTRE ÉPONGE MICRO POREUX FILTRE OPTIONNEL (P) RÉSERVOIR DE REMPLISSAGE DE L’EAU FILTRE CÉRAMIQUE JOINT D’ÉTANCHÉITÉ DE RONDELLE LA PLAQUE PLAQUE DE FILTRE ADAPTATEUR DE FILTRE JOINT D’ÉTANCHÉITÉ DU FILTRE JOINT D’ÉTANCHÉITÉ DU FILTRE CARTOUCHE DE FILTRE ÉCROU COUVERCLE DU RÉSERVOIR D’EAU RÉSERVOIR D’APPROVISIONNEMENT D’EAU PIERRES MINÉRALES...
Page 9
• Lorsque le réservoir de remplissage d’eau est rempli, videz et jetez le premier filtrage. Votre Système d’eau gravitationnel PiMag Aqua Pour de Nikken est prêt pour l’utilisation. Remplissez le réservoir de remplissage d’eau et posez le couvercle (A)
Page 10
• Repositionnez la plaque au-dessus du couvercle du réservoir d’eau. ENTRETIEN Conservez le Système d’eau gravitationnel PiMag Aqua Pour de Nikken à l’abri de la lumière directe. Lavez les réservoirs d’eau à la main régulièrement (une tois par mois environ) pour garantir leur propreté...
Page 11
Solutions : (1) Contrôlez la qualité de l’eau utilisée dans le système. (2) Nettoyez ou remplacez le filtre éponge micro poreux. (3) Remplacez la cartouche de filtre. Visitez le site Web de l’Aqua Pour à www.e-nikken.com/aqua_pour pour plus d’informations et des Q&R. -11-...
Page 12
Mineral stones: every year RAPPEL DE REMPLACEMENT DES COMPOSANTS Pour commander des filtres supplémentaires, appelez Nikken au 1-800-669-8898 ou commandez en ligne. Inscrivez la date de remplacement de chacun des composants dans les cases ci-dessous. Prenez note de l’intervalle de remplacement et remplacez chaque composant au moins aussi souvent que recommandé.
Need help?
Do you have a question about the Aqua Pour and is the answer not in the manual?
Questions and answers
The ceramic filter won't let any water through, we left it for over 10 hours and nothing. Why is this happening? Also, where do I buy replacement parts? Is this product discontinued?
The ceramic filter of the Nikken Pour may not allow water to pass through because it takes a long time for water to get through it naturally. If it becomes discolored, it may be partially clogged. In that case, washing it well with water and lightly scrubbing it can help restore flow.
This answer is automatically generated