Cpu Installation Procedures - MSI MS-6120 Manual

2.1-1 CPU Installation Procedures

There are two kinds of Pentium
®
OEM Pentium II processor and the Boxed Pentium
®
Pentium II processor has no Heat Sink, Fan and Heat Sink Support, while
the Boxed Pentium
Sink Support.
A. OEM Pentium
Processor
Lock
®
Pentium II
Processor
Heat Sink
Support
Top Bar
Heat Sink
Support Base
Required Things:
®
Pentium II processor - Processor.
*Retention Mechanism(RM) - Plastic Guide that holds the S.E.C. Catridge
*Retention Mechanism Attach Mount(RMAM) - Bolt/Bridge assemblies
*Heat Sink Support Base (HSSBASE) - Plastic support bar mounted to
®
II processor that is currently used: the
®
II processor is provided with Heat Sink w/ fan and Heat
®
II processor Installation Procedures
Heat Sink
Support Pin
in the Slot 1 connector.
inserted up through the bottom of the
motherboard. RM secures to RMAM ( 2
RMAM required per RM ).
the mainboard under the ATX heatsink.
(One leg is always bigger than the other one)
®
II processor. OEM
2-2
Heat Sink
W/Fan
Notch Hole
Retention
Mechanism