Memorex MA4221 User Manual

Alarm Clock
Space Saving
I'll Wake You Up in Style
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to
the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
ATTENTION: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized
change or modification is made.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The rating information is located at the bottom of the apparatus.
SURGE PROTECTORS: It is recommended to use a surge protector for AC connection. Lightning and power surges ARE NOT covered under warranty for
this product.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
This Class B digital apparatus complies with Canadian ICES-003.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these Instructions. manufacturer, or sold with the apparatus. When a
2. Keep these Instructions. cart is used, use caution when moving the cart/
3. Heed all Warnings. apparatus combination to avoid injury from tip-over.
4. Follow all Instructions. 13. Unplug this apparatus during lightning storms or
5. Do not use this apparatus near water. when unused for long periods of time.
6. Clean only with a dry cloth. 14. Refer all servicing to qualified service personnel.
7. Do not block any of the ventilation openings. Install in accordance with Servicing is required when the apparatus has
the manufacturer's instructions. been damaged in any way, such as power-supply
8. Do not install near any heat sources such as radiators, heat registers, cord or plug is damaged, liquid has been spilled or objects have fallen
stoves, or other apparatus (including amplifiers) that produce heat. into the apparatus, the apparatus has been exposed to rain or moisture,
9. Do not defeat the safety purpose of the polarized or grounding-type does not operate normally, or has been dropped.
plug. A polarized plug has two blades with one wider than the other. 15. WARNING: To reduce the risk of fire or electric shock, do not expose this
A grounding-type plug has two blades and a third grounding prong. apparatus to rain or moisture. Do not place objects filled with water, such
The wide blade or the third prong are provided for your safety. When as a vase, on the apparatus.
the provided plug does not fit into your outlet, consult an electrician for 16. The AC mains plug is used as the power disconnect device and it should
replacement of the obsolete outlet. remain readily accessible and operable during intended use. In order to
10. Protect the power cord from being walked on or pinched particularly at completely disconnect the apparatus from power, the mains plug should
plugs, convenience receptacles, and the point where they exit from the be completely removed from the AC outlet socket.
apparatus. 17. CAUTION: To reduce the risk of fire or explosion, do not expose batteries
11. Only use attachments/accessories specified by the manufacturer. to excessive heat such as sunshine, fire or other heat sources.
12. Use only with a cart, stand, tripod, bracket, or table specified by the
PRECAUCIÓN
RIESGO DE DESCARGA ELÉCTRICA
NO ABRIR
PRECAUCIÓN: PARA REDUCIR EL RIESGO DE DESCARGA ELÉCTRICA, NO QUITE LA CUBIERTA (NI LA PARTE TRASERA). NO CONTIENE PIEZAS EN EL
INTERIOR QUE PUEDAN SER REPARADAS POR EL USUARIO. EL MANTENIMIENTO DEBE SER REALIZADO POR PERSONAL DE MANTENIMIENTO CALIFICADO.
VOLTAJE PELIGROSO: El rayo con el símbolo de la punta de flecha dentro de un triángulo equilátero tiene como objetivo advertir al
usuario acerca de la presencia de voltaje no aislado peligroso dentro de la caja del producto que puede ser de magnitud suficiente
para generar un riesgo de descarga eléctrica para las personas.
ATENCIÓN: El signo de exclamación dentro de un triángulo equilátero tiene como objetivo alertar al usuario acerca de la presencia de
instrucciones de funcionamiento y mantenimiento (servicio) importantes en la bibliografía que acompaña a la aplicación.
ADVERTENCIA DE LA FCC: ESTE EQUIPO PUEDE GENERAR O UTILIZAR ENERGÍA DE RADIO FRECUENCIA. LOS CAMBIOS O LAS MODIFICACIONES DE
ESTE EQUIPO PUEDEN PROVOCAR INTERFERENCIA PERJUDICIAL, A MENOS QUE ESTÉN EXPRESAMENTE APROBADAS EN EL MANUAL DE INSTRUCCIONES.
EL USUARIO PODRÍA PERDER LA AUTORIDAD PARA HACER FUNCIONAR ESTE EQUIPO SI REALIZA ALGÚN CAMBIO O MODIFICACIÓN NO AUTORIZADOS.
PRECAUCIÓN: PARA EVITAR DESCARGAS ELÉCTRICAS, UNA LA CLAVIJA ANCHA DEL ENCHUFE CON LA RANURA ANCHA E INSÉRTELA POR COMPLETO.
ESTE DISPOSITIVO CUMPLE CON LA PARTE 15 DE LAS REGLAS DE LA FCC (FEDERAL COMUNICATIONS COMMISSION). EL FUNCIONAMIENTO DEPENDE DE
LAS DOS CONDICIONES QUE SE MENCIONAN A CONTINUACIÓN: (1) ESTE DISPOSITIVO NO CAUSA INTERFERENCIA NOCIVA Y (2) ESTE DISPOSITIVO DEBE
ACEPTAR TODA INTERFERENCIA RECIBIDA, INCLUYENDO INTERFERENCIA QUE PUEDA OCASIONAR UN FUNCIONAMIENTO INDESEABLE.
NOTA: Este equipo ha sido probado y cumple con los límites correspondientes a un dispositivo digital Clase B, según la parte 15 de las Normas de FCC.
Estos límites están diseñados para proporcionar una protección razonable contra la interferencia dañina en una instalación residencial. Este equipo genera,
utiliza y puede irradiar energía de radiofrecuencia y, si no se instala y usa de acuerdo con las instrucciones, puede generar interferencia perjudicial en
las comunicaciones de radio. Sin embargo, no se garantiza que la interferencia no se produzca en una instalación en particular. Si este equipo genera
interferencia perjudicial en la recepción de radio o televisión, que puede determinarse encendiendo y apagando el equipo, se recomienda al usuario que
intente corregir la interferencia mediante una o más de las siguientes medidas:
• Vuelva a orientar o ubicar la antena receptora.
• Aumente la separación entre el equipo y el receptor.
• Conecte el equipo a un tomacorriente de un circuito distinto del que está conectado el receptor.
• Consulte con el distribuidor o con un técnico de radio o TV experimentado para obtener asistencia.
• La información de clasificación se encuentra en la parte inferior del aparato
PROTECTORES CONTRA SOBRETENSIÓN: SE RECOMIENDA UTILIZAR UN PROTECTOR CONTRA SOBRETENSIÓN PARA LA CONEXIÓN DE CA. LOS CASOS
DE SOBRETENSIÓN DE ENERGÍA Y RAYOS NO ESTÁN CUBIERTOS POR LA GARANTÍA DE ESTE PRODUCTO.
ADVERTENCIA: PARA EVITAR EL RIESGO DE INCENDIO O DESCARGA, NO EXPONGA ESTA UNIDAD A LA LLUVIA O LA HUMEDAD.
Este aparato digital Clase B cumple con la norma canadiense ICES-003.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
1. Lea estas instrucciones. carro, tenga cuidado al mover la combinación
2. Conserve estas instrucciones. de carro y aparato para evitar lesiones por
3. Preste atención a todas las advertencias. caídas.
4. Siga todas las instrucciones. 13. Desconecte el aparato durante las tormentas
5. No utilice este aparato cerca de agua. eléctricas o cuando no se utilice durante un
6. Limpie sólo con un paño seco. período prolongado.
7. No bloquee ninguna de las aberturas de ventilación. Instale el 14. El mantenimiento debe ser llevado a cabo por
producto de acuerdo con las instrucciones del fabricante. personal de mantenimiento calificado. Se requiere mantenimiento
8. No instale el producto cerca de fuentes de calor, como radiadores, si el aparato se dañó de alguna forma; por ejemplo, si se derramó
rejillas de calefacción, estufas u otros aparatos (incluidos los líquido o cayeron objetos dentro del aparato, si se expuso a la lluvia o
amplificadores) que generen calor. a la humedad, si se cayó, si no funciona normalmente o si se dañó el
9. No rechace el objetivo de seguridad del enchufe polarizado o de cable de alimentación o el enchufe.
conexión a tierra. Un enchufe polarizado tiene dos clavijas: una más 15. ADVERTENCIA: Para reducir el riesgo de incendio o descarga eléctrica,
ancha que la otra. Un enchufe de conexión a tierra posee dos clavijas no exponga este aparato a la lluvia o a la humedad. No coloque
y una tercera prolongación de conexión a tierra. La clavija ancha y objetos con líquidos (p. ej., jarrones) sobre el aparato.
16. El cable de alimentación de CA es el dispositivo para desconectar la
la tercera clavija se proporcionan para su seguridad. Si el enchufe
proporcionado no encaja en su tomacorriente, comuníquese con un corriente; por lo tanto, debe estar al alcance de la mano y se debe
electricista para reemplazar el tomacorriente obsoleto. poder manejar durante el uso previsto. Para desconectar el aparato de
10. Proteja el cable de alimentación de pisadas o pinchaduras, en la corriente, el cable de alimentación se debe quitar completamente
particular en los enchufes, los tomacorrientes y el punto de donde del tomacorriente de CA.
salen del aparato. 17. PRECAUCIÓN: Para reducir el riesgo de incendio o explosión, no
11. Utilice sólo dispositivos/accesorios especificados por el fabricante. exponga las pilas a calor excesivo, como la luz solar directa, el fuego
12. Use sólo el carro, el pie, el trípode, el soporte o la mesa especificados u otras fuentes de calor.
por el fabricante o que se vendan con el aparato. Cuando se utilice un
MISE EN GARDE
RISQUE DE CHOC ÉLECTRIQUE NE
PAS OUVRIR
MISE EN GARDE : POUR RÉDUIRE LES RISQUES DE CHOC ÉLECTRIQUE, NE PAS RETIRER LE COUVERCLE (OU L'ARRIÈRE). AUCUNE PIÈCE À L'INTÉRIEUR
NE PEUT ÊTRE RÉPARÉE PAR L'UTILISATEUR. CONFIEZ TOUTE RÉPARATION À UN TECHNICIEN QUALIFIÉ.
TENSION DANGEREUSE : L'éclair avec le symbole de la pointe de flèche dans un triangle équilatéral est destiné à alerter l'utilisateur
de la présence de tension dangereuse non isolée dans le boîtier du produit. Elle peut être suffisamment importante pour constituer un
risque de décharge électrique pour les personnes à proximité.
ATTENTION : Le point d'exclamation dans un triangle équilatéral est destiné à alerter l'utilisateur de la nécessité de respecter les
consignes d'utilisation et de maintenance (réparation) fournies dans la documentation qui accompagne l'appareil.
AVERTISSEMENT DE LA FCC : CET APPAREIL PEUT GÉNÉRER OU UTILISER DE L'ÉNERGIE DE RADIOFRÉQUENCE. TOUT CHANGEMENT OU MODIFICATION
DE CET APPAREIL PEUT ENTRAÎNER DES INTERFÉRENCES NUISIBLES À MOINS QUE LES MODIFICATIONS NE SOIENT EXPRESSÉMENT APPROUVÉES DANS
LE GUIDE D'UTILISATION. L'UTILISATEUR RISQUE LE RETRAIT DE L'AUTORISATION D'UTILISER CET ÉQUIPEMENT SI UNE MODIFICATION OU UN CHANGEMENT
NON AUTORISÉ EST EFFECTUÉ.
MISE EN GARDE : POUR ÉVITER TOUT RISQUE DE CHOC ÉLECTRIQUE, INSÉREZ À FOND LA LAME LA PLUS LARGE DANS L'ORIFICE LE PLUS LARGE DE
LA PRISE.
CET APPAREIL EST CONFORME À LA SECTION 15 DES RÈGLEMENTS DE LA FCC. LE FONCTIONNEMENT EST SOUMIS AUX DEUX CONDITIONS SUIVANTES
: (1) CE DISPOSITIF N'EST PAS CENSÉ CAUSER D'INTERFÉRENCES NUISIBLES, ET (2) CE DISPOSITIF DOIT RECEVOIR TOUTE INTERFÉRENCE, Y COMPRIS
CELLES POUVANT CAUSER UN FONCTIONNEMENT NON DÉSIRÉ.
REMARQUE : Cet appareil a été testé et approuvé comme étant conforme aux limites préconisées pour un appareil numérique de la classe B
conformément à la section 15 des réglementations de la FCC. Ces limites sont conçues pour fournir une bonne protection contre les interférences nuisibles
dans une installation domestique. Cet appareil génère, utilise et peut émettre de l'énergie de radiofréquence et, s'il n'est pas installé et utilisé conformément
aux instructions, peut perturber les communications radio. Cependant, il n'existe aucune garantie quant à l'absence d'interférences dans une installation
particulière. Si cet appareil cause des interférences nuisibles au niveau de la réception radio ou de la télévision, (ce qui peut être vérifié en l'allumant et en
l'éteignant), l'utilisateur doit essayer de remédier au problème en prenant les mesures suivantes :
• Réorientez ou repositionnez l'antenne réceptrice.
• Augmentez la distance qui sépare l'appareil du récepteur.
• Connectez l'appareil à une prise sur un circuit différent de celui utilisé par le récepteur.
• Consultez le revendeur ou un technicien radio/téléviseur expérimenté.
• La plaque signalétique est apposée sous l'appareil.
PARASURTENSEURS : IL EST RECOMMANDÉ D'UTILISER UN PARASURTENSEUR POUR LE BRANCHEMENT SUR COURANT ALTERNATIF. LES DÉGÂTS DUS À
LA FOUDRE ET AUX SURTENSIONS NE SONT PAS COUVERTS PAR LA GARANTIE QUI ACCOMPAGNE CE PRODUIT.
AVERTISSEMENT : POUR ÉVITER TOUT RISQUE D'INCENDIE OU DE DÉCHARGE ÉLECTRIQUE, N'EXPOSEZ PAS CET APPAREIL
À LA PLUIE OU À L'HUMIDITÉ.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IMPORTANTES CONSIGNES DE SÉCURITÉ
Lisez ces consignes. appareil et chariot pour éviter des blessures
2. Conservez ces consignes. causées par un basculement.
3. Tenez compte de tous les avertissements. 13. Débranchez cet appareil pendant les orages ou
4. Suivez toutes les consignes. si vous prévoyez de ne pas l'utiliser pendant
5. N'utilisez pas cet appareil à proximité de l'eau. une longue période.
6. Nettoyez uniquement avec un chiffon sec. 14. Confiez toute réparation à du personnel
7. Ne bouchez pas les orifices prévus pour la ventilation. Installez qualifié. Une réparation est nécessaire si
conformément aux instructions du fabricant. l'appareil a été endommagé de quelconque
8. N'installez pas l'appareil à proximité de sources de chaleur telles que manière, par ex. si le câble ou la fiche d'alimentation est abîmé(e), ou
les radiateurs, les grilles de chauffage, les cuisinières ou d'autres du liquide a été renversé ou si des objets sont tombés dans l'appareil,
appareils (y compris les amplificateurs) qui génèrent de la chaleur. ou encore si ce dernier a été exposé à la pluie ou à l'humidité, ne
9. Ne supprimez en aucun cas la fonctionnalité de sécurité de la fiche fonctionne pas normalement, ou est tombé.
polarisée ou avec mise à la terre. Une fiche polarisée comporte deux 15. AVERTISSEMENT: Pour réduire le risque d'incendie ou de choc
lames avec une plus large que l'autre. Une fiche avec mise à la terre a électrique, n'exposez pas cet appareil à la pluie ni à l'humidité. Aucun
deux lames et une troisième broche de mise à la terre. La lame large objet contenant du liquide, comme un vase, ne doit être posé sur
ou la troisième broche ont été prévues pour votre sécurité. Si vous ne l'appareil.
parvenez pas à brancher la fiche fournie dans votre prise, consultez 16. La fiche secteur est utilisée comme dispositif de mise hors tension
un électricien afin qu'il remplace la prise obsolète. et doit rester aisément accessible et fonctionnelle à tout moment
10. Protégez le cordon d'alimentation pour qu'il ne soit pas piétiné ou pendant l'utilisation prévue. Pour mettre l'appareil totalement hors
pincé en particulier au niveau des fiches, des prises de courant et à tension, retirez complètement la fiche de la prise secteur.
l'endroit où il sort de l'appareil. 17. MISE EN GARDE : Pour réduire le risque d'incendie ou d'explosion,
11. Utilisez uniquement les fixations ou les accessoires recommandés par n'exposez pas les piles à une chaleur intense, par exemple au soleil,
le fabricant. au feu ou à d'autres sources
12. Utilisez uniquement avec un chariot, un pied, un trépied, un support de chaleur.
ou une table recommandé(e) par le fabricant ou vendu(e) avec
l'appareil. Si un chariot est utilisé, déplacez prudemment l'ensemble
AC CONNECTION
Insert the small end of the AC adapter into the DC IN 5V jack (located on the rear of the unit). Connect the other end to a wall
ao
outlet having 120V AC, 60 Hz.
NOTES:
• Remove both the DC plug and the AC-IN plug to disconnect the AC adapter when not in use.
• Only use the supplied AC adapter which has the following specs: DC5V, 1.2A.
BATTERY INSTALLATION
Two "AAA" size batteries are used for time/alarm backup. Insert the batteries in this unit as follows:
1. Open the Battery Compartment door on the bottom of the unit by sliding in direction 1, then
aq
lifting it off in direction 2.
2. Insert two (2) "AAA" batteries into the Battery Compartment as shown. Be sure to observe the
polarity markings which are engraved inside the battery compartment. Alkaline batteries are
recommended for the longest playing time.
3. Slide the Battery Compartment door back on.
NOTES:
• The AC adapter must be disconnected from the DC IN 5V jack in order for the unit to operate on
battery power.
• The battery icon will blink in the display when the batteries are low.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Warning – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
2. Use only the size and type of batteries specified.
3. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. A reversed battery may cause damage to
the device.
4. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with fresh ones.
5. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
6. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow battery manufacturer's directions.)
7. Remove batteries promptly if consumed.
8. Clean the battery contacts and also those of the device prior to battery installation.
LOCATION OF CONTROLS
1
8 1. Tune/Skip/Search 9 Button
2
9
3
10 2. Source Button
4
3. Snooze/Dimmer Button
4. Play/Pause4 ; Button
5. iPod or iPhone Device Dock
with Connector
6. Sleep Button
7. Volume – (Down) Button
8. Tune/Skip/Search : Button
9. Power Button
10. Alarm On/Off Button
5
11. Set Time/Sync Button
6
11
7 12 12. Volume + (Up) Button
13
13. Display
14. Line IN Jack
15. DC IN 5V Jack (AC ADAPTER PART
NO. 0251-211120-90003*)
16. FM Antenna
17. Battery Compartment (Bottom of unit)
(BATTERY COVER PART NO.
3052-017806-30000 *)
*Consumer Replaceable Part
(See end of guide to order.)
15
14
16
17
OPERATION
To set or reset the actual time:
It is highly recommended to install the Memorex FM Radio + Alarm Clock App to utilize its capabilities. See the App-Enhanced
Application section later in this manual.
Regardless of the source, or if the power is on or off, you can set the time as follows:
1. Press and hold the Set Time/Sync button until the AM/PM indicator blinks.
ak
2. Set the unit to standard 12 hour time or 24 hour (military) time using the Tune/Skip/Search 9 or :
u
the Set Time/Sync button again; the hours will blink.
ak
3. Set the current hour using the Tune/Skip/Search 9 u or : W button. Then press the Set Time/Sync button again ak; the
minutes will blink.
4. Set the current minutes using the Tune/Skip/Search 9 or : button. Then press the Set Time/Sync button again ak;
u W
the time will be set.
To sync the iPod ® or iPhone ® device's time to this unit's time:
With the power on, connect an iPod or Phone device as shown later in this manual. Press the Set Time/Sync button
time appears and the display blinks twice. The time will then be synced.
NOTES:
• The Set Time/Sync button will not set the alarm.
• The iPod mini, iPod photo and iPod 4th generation do not support the SYNC function.
To set the alarm:
Regardless of the source, or if the power is on or off, you can set the alarm times as follows:
1. Press and hold the Alarm On/Off button until the alarm time blinks.
at
2. Set the alarm hour using the Tune/Skip/Search 9 or : button. Then press the Alarm On/Off button
u W
alarm minutes will blink.
3. Set the alarm minutes using the Tune/Skip/Search 9 or : button. Then press the Alarm On/Off button
u W
source icon will blink.
4. Set the desired source to wake to (iPod, Radio or Buzzer) using the Tune/Skip/Search 9 or :
u W
Alarm On/Off button again; the volume level will blink.
at
5. Set the volume using the Volume + or – button. Then press the Alarm On/Off button again and the alarm will be
al V at
set. The alarm icon will appear in the display to indicate it is activated.
OPERATION (CONTINUED)
NOTES:
• If radio is selected, the last frequency will be tuned.
• You can also sync the alarm times from the app to this unit (see the App-Enhanced Application section).
• If you select iPod, the iPod or iPhone device must be inserted and turned on.
To turn the alarm off:
To turn the alarm off, simply press the Alarm On/Off button at. The alarm will turn off, but will remain set for the next day. To turn the
alarm off so it will not sound the next day, press the Alarm On/Off button
at
Snooze:
While the alarm is sounding, press the Snooze/Dimmer button w. The alarm will turn back on automatically ten minutes later. If
desired, press the Snooze/Dimmer button w again for another ten minutes after the original Snooze time has been reached. You may
repeat this process. To cancel the Snooze function, press the Alarm On/Off button at.
Sleep:
1
2
With the unit on, press the Sleep button U; "SLEEP" will blink and "10" will show in the display, which indicates the unit will turn off
after 10 minutes. Repeatedly press the Sleep button to select the Sleep time, up to 90 minutes in 10 minute increments. After a
U
couple seconds, the Sleep time will disappear from the display.
Front of unit
NOTE: To cancel the Sleep function, repeatedly press the Sleep button until "SLEEP" disappears from the display.
A A A
Line In Jack (Rear of Unit)
A A A
Insert one end of an audio cable (not included) into the LINE OUT jack on your external audio unit and the other end into the LINE
IN jack on the rear of this unit. To listen to the external audio unit, turn this unit on using the Power button X, and turn on
an
the external unit as well. Repeatedly press the SOURCE button to select Line In mode; "line-in" will appear in the display. The
v
external audio unit's output sound will be heard through this unit's speakers. If you wish to listen to the iPod or iPhone device in the
iPod or iPhone device compartment, repeatedly press the SOURCE button
Using an iPod or iPhone Device with this Unit
With an iPod or iPhone device connected, if this unit is not already on, turn this unit on by pressing the Power button X. Repeatedly
press the Source button to select iPod or iPhone device mode; "iPod" will appear in the display.
v
You can operate the iPod or iPhone device using its own controls, as per its owner's manual, or you can use the controls on this
unit to operate the iPod or iPhone device.
To play/pause the iPod or iPhone device:
Press the Play/Pause4 ;button to start playback on your iPod or iPhone device. Press again to pause playback, the Pause indicator
x
will blink in the display; press yet again to resume playback. If you have the Shuffle and/or the Repeat option selected on your iPod
or iPhone device, the respective indicator will appear in this display.
To skip forward or backward on the iPod device: Press the Tune/Skip/Search 9
beginning of the current track, previous or next track.
To search forward or backward on the iPod device: Press and hold the Tune/Skip/Search 9
search within the currently-playing track.
To adjust the main volume: Press the Volume + or – button to increase or decrease the volume.
al V
To turn the unit off: To turn this unit off, press the Power button X.
NOTE: After you have adjusted the volume setting, if you turn the unit off and then on again, the volume level will be set to the level
you selected prior to turning the unit off.
Using the FM Radio
It is highly recommended to install the Memorex FM Radio + Alarm Clock App so you can set FM presets, view the frequencies, and
more. See the App-Enhanced Application section later in this manual.
Turn this unit on by pressing the Power button X.
Repeatedly press the Source button v to select Radio mode; "radio" will appear in the display.
Repeatedly press the Tune/Skip/Search 9 or : button to manually advance the frequency up or down until the desired
u W
frequency is playing.
For auto tuning, press and hold the Tune/Skip/Search 9
or :
u W
the tuner will search and then stop on the next strong station it finds. Repeat this step until the desired frequency appears in
the display.
To adjust the main volume: Press the Volume + or – button to increase or decrease the volume.
al V
To turn the unit off: To turn this unit off, press the Power button X.
To change the FM region:
This unit allows you to set the desired radio region. For region details, see Radio Regions below.
• With the unit off, press and hold the Source and Play/Pause4
v ;x
in the display.
• Within four seconds, select a region using the Tune/Skip/Search 9
• When done setting, press any button or wait for five seconds; the region will be set.
RADIO REGIONS: Region 1 – United States (87.5MHz to 108MHz)
Region 2 – Europe (87.5MHz to 108MHz)
Region 3 – Japan (76MHz to 108MHz)
Dimmer: Press the Snooze/Dimmer button to dim the display.
w
App-Enhanced Application
When first connected to an App-compatible device, a message may appear on the iPod or iPhone device stating an Application
is not installed. Click YES and your device will take you to the App Store to install the free App, Memorex FM Radio + Alarm Clock
App. Follow the online instructions to install. You can also install the Memorex FM Radio + Alarm Clock App directly from the
App Store.
NOTE: App requires iOS 4.0 or greater.
To use the App:
The default display is the Alarms screen. Here you can turn the alarms on or off, set Alarm 1 and/or Alarm 2, and set the source,
volume and snooze time. Press Sync to sync the alarms on the iPod or iPhone device with this unit.
Settings: Press the Settings icon to bring up the Settings display. Here you can sync clock time, toggle 12/24 hour mode, set
display brightness, and set the Sleep timer.
About: Press the About icon to view the About display, which will give you information about your unit and the latest version installed.
Audio: Press the Audio icon to bring up the Audio display. Here you can select iPod, FM, AUX or OFF. The FM function is in sync
with this unit's FM radio and buttons. Therefore, after selecting FM you can drag the frequency on the iPod or iPhone device to the
left or right to select a frequency, or you can use this unit's controls for the same results.
To make a preset of a frequency, simply press and hold one of the six presets until the iPod or iPhone device vibrates to memorize
the station. To recall, simply press the preset.
Note: The App is subject to change without notice and is not compatible with all iPod devices.
SPECIFICATIONS AND COMPATIBILITY
button. Then press
W
GENERAL:
Power Source ...............DC 5V, 1.2A Adapter (Center Positive) Output Power........................................................... 1 x 0.8W
Speaker . .............................................................. 1 x 4 ohm Weight ..................................................................... 0.96 lbs
Dimensions .................. 4.45 (W) x 3.30 (D) x 6.97 (H) inches Specifications are subject to change without notice.
Made for iPod touch (2nd, 3rd and 4th generation), iPod classic, iPod nano (2nd, 3rd, 4th, 5th and
until the current
ak 6th generation), iPhone 4S, iPhone 4, iPhone 3GS and iPhone 3G.
"Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to
connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the
use of this accessory with iPod or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
Imation Enterprises Corp.
1 Imation Way, Oakdale, MN 55128-3414 USA
again; the
at
© Imation Corp. www.memorex.com
Memorex and the Memorex logo are trademarks of Imation Corp and its affiliates. All other trademarks are the property of their
again; the
at
respective owners.
For additional setup, operating assistance or an electronic version of this user manual, please visit www.memorex.com
button. Then press the
For consumer replaceable part(s), verify part number(s) then contact our parts and accessory fulfillment center at: 1-800-379-8439
User Guide
Please read these instructions completely
before operating this product
memorex.com
MA4221
again so the alarm indicator disappears from the display.
to select iPod mode; "iPod" will appear in the display.
v
or : button to skip to the
u W
or : button to
u W
button until the frequency starts to scan, then release;
buttons simultaneously until the region number appears
or : button.
u W
73952353-D