Page 2
Dear Customer: Thank you for choosing our product. Please read this manual carefully before using and installing the appliance. The instructions in this manual are for the best installation, use and care of the appliance. You will find that the clean lines and modern look of your oven blends in perfectly with your kitchen decor. The oven is easy to use and performs to a high standard. We also make a range of products that will enhance your kitchen, such as cooker hoods, built‐in hobs, built‐in ceramic hobs and built‐in ovens, microwaves, washing machines, tumble dryers, dishwashers and refrigerators. We make every effort to ensure that our products meet all your requirements. Our service department is at your disposal to answer all your questions and to listen to your suggestions. Please take not of the warranty section at the back of this manual and retain all documents related to the purchase of this product. We are committed to providing increasingly efficient products that are easy to use, environmentally friendly, attractive and reliable. ...
Page 3
Index CAUTIONS pag.3-4 Instructions for installation: Dimensions and installation features pag. 5 Electrical connection pag. 6 Ventilation and gas connection pag. 6 Adaptation to different types of gas pag. 7 Setting the minimum flame pag. 7 Burner and injector characteristic table pag.
Page 4
CAUTIONS: This Appliance should be installed in accordance with local gas regulations and only used in a well ventilated space. Read the instructions before installing or using this appliance. Before using the oven we suggest: ‐ Heat the oven at maximum temperature for 45 minutes to remove unpleasant odours and smoke caused by working residues and thermal insulation. ‐ Carefully clean the oven with warm, soapy water and rinse it. Do not use a hose or spray water onto the appliance. ‐ Very important: Keep this instruction booklet safe for useful references. ‐ This appliance is designed for use in private homes. ‐ This appliance is not intended for use by young children. ‐ Do not touch the heating elements inside the oven. ‐ When the grill is on, all the accessible elements are hot, hence, keep children away from these elements. ‐ This appliance should be installed by an authorised person and in accordance with the manufacturer’s installation instructions, local gas fitting regulations, municipal building codes, electrical wiring regulations and local water supply regulations. ‐ Before switching this appliance on, check that it is correctly regulated for the type of gas available (see relevant section). ‐ Before maintenance or cleaning, disconnect the appliance from the mains and wait for it to cool down. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass as they can scratch the surface, which may result in the glass shattering. ‐ When the burners are lit, make sure that the flame is always regular. Before removing the saucepan/pot, turn the burners off. ‐ Servicing of this appliance should only be carried out by authorised personnel. ‐ If the electricity supply cord is damaged, it must be replaced by authorised personnel or qualified person in order to avoid hazard. ‐ The use of a gas appliance produces heat and humidity in a room. Make sure that the room is well ventilated, keeping natural ventilation outlets open or installing a cooker hood. ‐ If a gas appliance is used for a long period of time then it may require extra ventilation (opening a window or increasing the volume of the cooker hood). ‐ Never line the oven with aluminium sheets. ‐ Be careful not to use saucepans/pots with unstable or deformed bottoms on the burners to avoid overturning or spilling. ‐ If the mains of a burner is turned off accidentally, turn off the control knob. Only light the oven again after waiting at least a minute. ‐ Keep packaging out of reach of children at all times. ‐ Always use oven gloves when removing and replacing food in the oven. 3 ...
ELECTRICAL CONNECTION The appliance is fitted with an Australian approved 15 Amp flexible cord and plug which must be connected to a correctly earthed socket outlet. The manufacturer is not liable for any direct or indirect damage caused by faulty installation or connection. It is therefore necessary that all installation and connection operations are carried out by qualified personnel complying with the local and general regulations in force.
Page 8
between 1 - 1.2m long. The hose should not be subjected to abrasion, kinking or permanent deformation and should be able to be inspected along its entire length. Unions compatible with the hose fittings must be used and connections tested for gas leaks. The flexible tube shall be fitted in such a way that it cannot come into contact with a moveable part of the housing unit (e.g.
Page 9
LPG TO NG:Use a thin blade screwdriver to turn the by-pass screw located above left of the gas valve,shaft as shown right. Turn gently the by-pass screw clockwise to the end completely then turn it anti-clockwise 1 turn for the Triple ring,7/8 turn for the Fish,3/4 turn for the Rapid,1/2 turn for the Semi- Rapid and 3/8 turn for the Auxiliary .
Service and Spares In the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local Kelvinator Service Centre by telephoning: 010 207 3000 (South African Customers) +27-10-207-3000 (International Customers) Help us to help you Please determine your type of enquiry before writing or telephoning.
It is at the sole discretion of Kelvinator that, in terms of guarantee, consideration be given to replace the appliance due to various parts failing of a similar nature or in the event of the...