Gardeline 2 in 1 Petrol Grass Trimmer/Brush Cutter Operating Instructions & User Manual
  1. Manuals
  2. Brands
  3. Gardeline Manuals
  4. Trimmer
  5. 2 in 1 Petrol Grass Trimmer/Brush Cutter
  6. Operating instructions & user manual

Gardeline 2 in 1 Petrol Grass Trimmer/Brush Cutter Operating Instructions & User Manual

2 in 1 petrol grass trimmer/brush cutter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Grass Trimmer/Brush Cutter
Operating Instructions - User Guide
After Sales Support
Now you have purchased a Gardenline
product you can rest assured in the
knowledge that as well as your
3 year parts and labour guarantee
you have the added peace of
mind of dedicated helplines
and web support.
AFTER SALES SUPPORT
0151 649 1500
GB
1890 946244
IRE
MODEL: GLBC 43
2 in 1 Petrol
®
www.einhell.co.uk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2 in 1 Petrol Grass Trimmer/Brush Cutter and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Gardeline 2 in 1 Petrol Grass Trimmer/Brush Cutter

  • Page 1 2 in 1 Petrol Grass Trimmer/Brush Cutter Operating Instructions - User Guide After Sales Support Now you have purchased a Gardenline ® product you can rest assured in the knowledge that as well as your 3 year parts and labour guarantee you have the added peace of mind of dedicated helplines and web support.

  • Page 2: Table Of Contents

    Contents Page Welcome General Information and Safety Instructions 9-19 Assembly and Parts List Features 21-31 Instructions 32-36 Useful information Warranty Card The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of Einhell UK Ltd.

  • Page 3: Welcome

    Welcome Congratulations! You have made an excellent choice with the purchase of this quality Gardenline® product. By doing so you now have the assurance and peace of mind which comes from purchasing a product that has been manufactured to the highest standards of performance and safety, supported by the high quality standards of ALDI.

  • Page 4: General Information And Safety Instructions

    General Information and Safety Instructions General safety regulations for the 2 in 1 Petrol Grass Trimmer/Brush Cutter IMPORTANT! Read and follow the operating instructions and safety information before using for the first time. When using equipment, a few safety precautions must be observed to avoid injuries and damage.

  • Page 5: Safety Devices

    Replace defective silencers. • Before using the 2 in 1 Petrol Grass Trimmer/Brush Cutter, visually inspect it to ensure that the blade, mounting bolts and the entire cutting apparatus are in good working order (i.e. not worn out or damaged). To prevent any imbalance, replace worn out or damaged blades and mounting bolts as a set only (if applicable).
  • Page 6 General Information and Safety Instructions Handling Operation, storage and monitoring • Wear close-fitting work clothing which is in good condition and which offers protection, such as long trousers, sturdy work shoes, hard-wearing gloves, a helmet, a face mask or goggles to protect your eyes, and good quality ear defenders to reduce the noise.
  • Page 7 General Information and Safety Instructions • Always operate the equipment in its high speed range for trimming and cutting. Do not let the engine run at low speed at the start of cutting or during trimming work. • Only use the equipment for the purpose for which it is intended, such as trimming and cutting weeds.
  • Page 8 General Information and Safety Instructions Safety precautions for handling the blade • Take note of all warnings and instructions relating to operating and fitting the blade. • The blade can recoil suddenly from objects if it cannot cut through them. This can cause injuries to the arms or legs.
  • Page 9 Assembly and Parts List Layout (see Fig. 1-13) Connecting piece for long handle Long handle Steady grip Starter line / starter cable Choke lever Petrol tank Fuel pump 'primer' Air filter housing cover On/Off switch Throttle lever lock Throttle lever Throttle lock Line spool with cutting line Cutting line guard hood...

  • Page 10: Items Supplied

    Assembly and Parts List Items supplied • Open the packaging and take out the equipment with care. • Remove the packaging material and any packaging and/or transportation braces (if provided). • Check to see if all items are supplied. • Inspect the equipment and accessories for transport damage.
  • Page 11 Assembly and Parts List Fig. 1a Fig. 1 Fig. 1b Fig. 1c Fig. 2 AFTER SALES SUPPORT 0151 649 1500 1890 946244 www.einhell.co.uk MODEL: GLBC 43...

  • Page 12: Before Starting The Equipment

    Assembly and Parts List Before starting the equipment Fitting the steady grip (Fig. 3a-3c) Fit the steady grip (3) as shown in Figures 3a-3c. Do not tighten the screw (Fig./Item 20) until you have set the optimum working position with the carrying strap (Fig.2/Item 17) (see also under 'Setting the cutting height' on page 17).
  • Page 13 Assembly and Parts List Fig. 4b Fig. 4c Fitting the blade guard hood IMPORTANT! The cutting blade guard hood (15) must be fitted when you want to work with the cutting blade. • The guard hood for the cutting blade must be installed as shown in Figures 5a-5b. Fig.

  • Page 14: Fitting/Replacing The Cutting Blade

    Assembly and Parts List Fitting/Replacing the cutting blade The procedure for fitting the cutting blade (18a/18b) is shown in Figures 6a-6g. To dismantle, proceed in reverse order. • Fit the carrier plate (22) onto the spline shaft as shown in Figure 6b. •...
  • Page 15 Assembly and Parts List Fig. 6e Fig. 6f Fig. 6g Fig. 7a Fig. 7b Fig. 7c AFTER SALES SUPPORT 0151 649 1500 1890 946244 www.einhell.co.uk MODEL: GLBC 43...
  • Page 16 Assembly and Parts List Fitting the cutting line guard hood on the cutting blade guard hood IMPORTANT! The cutting blade guard hood (Fig.7b/Item 15) must be fitted when you want to work with the cutting blade. • The guard hood for the cutting line must be installed as shown in Figures 7a-7b.
  • Page 17 Assembly and Parts List Fig. 7d Fig. 7e Setting the cutting height • Fit the carrying strap (17) as shown in Figures 8a-8c. • Hook the equipment to the carrying belt (Fig.8d). • Adjust to the perfect working and cutting position using the various strap adjusters on the carrying strap (Fig.
  • Page 18 Assembly and Parts List Fig. 8a Fig. 8b Fig. 8c Fig. 8d Fig. 8e Fig. 8f AFTER SALES SUPPORT 0151 649 1500 1890 946244 www.einhell.co.uk MODEL: GLBC 43...
  • Page 19 Assembly and Parts List Fuel and oil – Recommended fuels Use only a mixture of unleaded petrol and special 2-stroke engine oil. Mix the fuel mixture as indicated in the fuel mixing table. IMPORTANT! Do not use a fuel mixture which has been stored for longer than 90 days. IMPORTANT! Never use 2-stroke oil with a recommended mixing ratio of 100:1.

  • Page 20: Features

    Features Explanation of the warning signs on the equipment (see Fig. 14) Warning! Read the instructions before using for the first time! Wear protective headgear, goggles and ear Defenders! Wear sturdy, non-slip footwear! Wear safety gloves! Protect the equipment from rain and damp! Be careful of objects being catapulted away! Always switch off the equipment and disconnect the spark plug boot before carrying out any maintenance work!

  • Page 21: Instructions

    Instructions Proper use The 2 in 1 Petrol Grass Trimmer/Brush Cutter is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user/operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this.
  • Page 22 Instructions Then release the throttle lever by actuating it once. Actuating the throttle lever will also release the choke lever. (The engine returns to its idle state). If the engine does not start up, repeat steps 4-6 above. PLEASE NOTE! If the engine does not start up even after several attempts, read the section 'Troubleshooting' on page 33.
  • Page 23 Instructions Practical tips Practice all the work steps with the engine switched off before you start to use the equipment. Extending the cutting line CAUTION! Do not use any kind of metal wire or metal wire encased in plastic in the line spool.
  • Page 24 Instructions Fig. 9c Fig. 9d PLEASE NOTE! Even if it is used carefully, cutting around foundations, stone or concrete walls, etc. will result in the line suffering more than the normal level of wear. Trimming/cutting (with line spool/cutting blade) Swing the equipment from side to side in a scything motion. Always keep the cutting tool parallel to the ground.
  • Page 25 Instructions Cutting down to the ground (with line spool) When cutting down to the ground you will cut all the vegetation. To do this, set the line spool at an angle of 30° to the right. Place the handle in the required position (Fig.
  • Page 26 Instructions Preventing recoil When you work with the blade, there is a risk of recoil if it strikes solid objects (tree trunks, branches, tree stumps, stones or the like). This will throw the equipment backwards in the direction opposite to the rotation of the cutting tool. This can cause you to lose control of the equipment.
  • Page 27 Instructions Fig. 10a Fig. 10b Fig. 10c Fig. 11a Fig. 11b AFTER SALES SUPPORT 0151 649 1500 1890 946244 www.einhell.co.uk MODEL: GLBC 43...
  • Page 28 Instructions Replacing the line spool/cutting line Dismantle the line spool (13) as described under 'Fitting/Replacing the line spool' on page 16. Press the spool together (Fig. 12a) and remove one half of the housing (Fig. 12b). Take the spool plate (K) out of the line spool housing (Fig. 12c). Remove any remaining cutting line.
  • Page 29 Instructions Fig. 12c Fig. 12d Fig. 12e Fig. 12f Sharpening the guard hood blade The guard hood blade (Fig. 7a/Item F) can become blunt over time. If you notice this, undo the two screws holding the guard hood blade to the guard hood. Clamp the blade in a vice.
  • Page 30 Instructions Setting the throttle cable If the maximum speed of the equipment drops over time and you have ruled out all the other possible causes listed in the section 'Troubleshooting' on page 33, it may be necessary to adjust the throttle cable. First of all check whether the carburettor opens fully when the throttle lever is pressed right through.

  • Page 31: Storage And Transport

    Instructions Applying grease to the gear unit Add a little gear grease (approx. 10 g) after every 20 hours of operation. To do so, open the screw H (Fig. 7c). Environmental protection Dispose of soiled maintenance material and operating materials at the appropriate collection point.

  • Page 32: Useful Information

    Useful Information NOTE! Store the equipment in a dry place and far away from possible ignition sources such as an oven, a gas-fired hot water boiler, a gas-fired dryer, etc. Putting the equipment back into operation Remove the spark plug (see 8.3). Quickly tug on the starter line to remove excess oil from the combustion chamber.

  • Page 33: Troubleshooting

    Useful Information Troubleshooting Correct starting procedure Follow the instructions not followed for starting The motor Clean the spark plug or does not start Sooted or damp spark plug replace it with a new one Contact either an authorized customer service outlet or the Incorrect carburettor setting After Sales support details at the bottom of the page.

  • Page 34: Technical Data

    Useful Information Technical data Engine type 2-stroke engine, air-cooled, chrome cylinder Engine power (max.) 1.35 kW / 1.8 hp Displacement 42.7 ccm Idle engine speed 3000 min Max. engine speed: with blade: 9000 min with line spool: 8400 min Max. cutting speed with blade: 6800 min with line spool:...

  • Page 35: Disposal And Recycling

    Useful Information Wear ear defenders • The impact of noise can cause damage to your hearing. Operation • Vibration emission value a = 7.5 m/s • K uncertainty = 1.5 m/s Keep the noise emissions and vibrations to a minimum •...
  • Page 36 Useful Information AFTER SALES SUPPORT 0151 649 1500 1890 946244 www.einhell.co.uk MODEL: GLBC 43...

  • Page 37: Faq

    1. Fill in the Warranty card and send to the Einhell UK Ltd Address. How do I claim for 2. Contact Einhell UK Ltd, using one of the Telephone a warranty matter? numbers for AFTER SALES SUPPORT. 3. Or contact via the Einhell UK Ltd website. Make sure you have the information from the product data label, or page 31 of this manual, and then: - How do I obtain spare...
  • Page 38 AFTER SALES SUPPORT 0151 649 1500 1890 946244 www.einhell.co.uk MODEL: GLBC 43...

  • Page 39: Warranty Card

    Warranty Card 2 in 1 Petrol Grass Trimmer/Brush Cutter IMPORTANT! KEEP THIS FORM SAFE: Only complete and return this form to the address below in the unlikely event of a warranty claim, if you are requested by the manufacturer to return the item for replacement. Then please complete this form and send it together with your receipt (proof of purchase) to the address below.

This manual is also suitable for:

Glbc 43

Table of Contents

Save PDF