Reconnect To A Bluetooth Device; Bluetooth Settings - Samsung Tab4 User Manual

Reconnect to a Bluetooth Device

1. From a Home screen, touch
Connections tab
2. Touch the OFF/ON button to turn Bluetooth ON
3. Make sure that the target device is discoverable.
4. Touch the target device's name in the Bluetooth
devices section.
5. If prompted to enter a passcode, try 0000 or 1234, or
consult the target device's documentation.
Disconnect or Unpair from a
Bluetooth Device
Disconnect from a Bluetooth Device
You can disconnect your device from a Bluetooth device,
such as a headset. Disconnecting does not unpair the
Bluetooth device—the next time you connect, your device
and the target device will recognize each other and exchange
information without having to enter a passcode or PIN.
1. From a Home screen, touch
Connections tab
2. Touch the OFF/ON button to turn Bluetooth ON
3. Touch the connected device, and then touch OK to
disconnect.
61
Settings
Bluetooth.
Settings
Bluetooth.
Unpair from a Bluetooth Device
You can make your device forget its pairing connection with
another Bluetooth device. To connect to the other device
again, you may need to enter or confirm a passcode again.
.
1. From a Home screen, touch
Connections tab
2. Touch the OFF/ON button to turn Bluetooth ON
3. Under Paired devices, touch
then tap Unpair.

Bluetooth Settings

When Bluetooth is on, additional settings are available.
1. From a Home screen, touch
Connections tab
2. Touch the OFF/ON button to turn Bluetooth ON
3. Touch your device's name to enable or disable visibility
to other Bluetooth devices. When your device is visible,
other devices can find your device during a scan. Your
device remains visible for the period of time set in the
Visibility timeout setting.
.
Settings
Bluetooth.
next to the device, and
Settings
Bluetooth.
.
.