Page 1
Installation Manual For SONY Trinitron SUN 17e10/SGI 17e11-PC Color Monitor Series Please read Entirely Before Installation! This document contains instructions to connect a 17e10/17e11 color monitor to a PC system. Please read the documentation provided with the video card, for more instructions.
Page 2
CABLE CONNECTION : This monitor is converted to Pc and uses standard VGA DB15 connection. This monitor can work with any Macintosh system with the appropriate adapters or cables required. FRONT PANEL : This monitor has the following Controls: , Select , -,+ Brightness, -,+ Contrast Color temp, Convergence, Geometry, Size , Centering -,+ Brightness is used for adjusting vertical convergence, size and centering when appropriate SELECT button is pressed first.
Page 3
H.SIZE or Horizontal Size adjustment control: This is the monitor’s width size adjustment, you need to center the screen horizontally first before making this adjustment. Sometimes increasing the Horizontal size to the limits may cause the monitor to behave abnormal or the screen may become shaky. Normally leave about 1/8 of inch of blank border on each side of the screen, for the best result.
The refresh rate is dependable on your video card specifications. SONY Tube mask lines: This monitor has 2 very fainted horizontal lines across the screen. This is how SONY Trinitron Monitors are made to connect the tube masks together and this is not a monitor defect.