Targus Universal Backup Battery for iPad/Tablet Quick Start

Universal Backup Battery for iPad/Tablet
Universal USB Output Portable Battery Pack
Contents
Portable Backup Battery
Micro-USB Cable
STOP
Charging the Backup Battery
Using the Micro-USB Cable, connect the Micro-USB connector to the Backup Battery, and the Standard USB connector to a
1)
USB power source, like a laptop computer or smartphone USB charger. The LED will begin to blink when charging. When
all 4 LEDs are lit, the unit is fully charged. Charging will take 6-8 hours depending on the source.
Using the Backup Battery
To Power and Charge your iPad/tablet from the Backup Battery, you can either use the charge/sync cable that came with
1)
your device, or the included Micro-USB cable and optional Mini-USB Conncector tip.
Simply connect the Standard USB connector to the Backup Battery, connect the other end of the cable to your device,
and push the gray power button. The LEDs will turn on briefly, and your device will beging to charge.
MENU
2)
Use the mini-USB connector tip for devices requiring a mini-USB connector
Features and specifications are subject to change without notice. All trademarks and registered trademarks are the
property of their respective owners. All rights reserved. © 2011, Targus Group International, Inc. and Targus, Inc,
Anaheim, CA 92806 USA.
Mini-USB Connector
Electrical Rating
Battery Pack Capacity: 4800mAh
Input voltage: 5VAC, 1A max
Output voltage: 4.6-5.25V, 2.1A
Quick Start
APB27US / 410-2289-001A