Download Print this page

Sanyo SK-ST4 Instruction Manual page 3

4 slice cool touch toaster

Advertisement

• Do not permit power cord to come in contact with hot objects. A
damaged supply cord must be replaced by the manufacturer, its
service agent or a similarly qualified person in order to avoid a
hazard.
• Do not attempt to service this appliance yourself. Refer to
qualified service personnel.
FEATURES
1050-1150 Watts
6 Toast settings
High lift function
Cancel function
Removable crumb tray
Cool touch body
OPERATING INSTRUCTIONS
• After unpacking the toaster, remove any plastic bags, sticker or
packing that may present a hazard to young children and
destroy. Wipe the exterior of the toaster with a soft damp cloth or
towel and dry with a dry towel. Do not immerse the toaster in any
liquid.
• Place the toaster on a firm, horizontal surface and keep away
from other heat sources.
• Check that the loading handle is in the raised position, and the
browning control set to approximately half way before
connecting to the mains supply.
• Place bread in the bread slots, select the desired browning
setting level, and press the handle right down until it latches. The
bread will be lowered into the toaster and toasting will begin.
• Please note: The handle will not latch if the toaster is not
connected to the mains supply, and may not latch the browning
control is set to the minimum position.
• If you should find that the toast is not dark enough you may wish
to toast the bread again. Remember to increase the browning
control setting for subsequent operations. If the toast is to dark,
reduce the browning control before toasting the next slice.
• When toasting has finished the handle will rapidly rise to the
raised position. Toaster may be stopped at any time by pressing
the "Cancel" button.

Advertisement

loading