Table of Contents
Advertisement
VIVOTEK
Advanced Mode
Configuration list
Click to switch to Basic mode
Firmware Version
Each function on the configuration list will be explained in the following sections. Those functions that are
displayed only in Advanced Mode are marked with Advanced Mode . If you want to set up the advanced
functions, please click
[Advanced Mode]
on the bottom of the configuration list to quickly switch over.
System
This section explains how to configure the basic settings for the Network Camera, including
System, and System Time. When completed with the settings on this page, click Save at the
bottom of the page to enable the settings.
System
Host name: Enter the desired name for the Network Camera. The text will be displayed at the top of the
main page.
Turn off the LED indicators: If you do not want others to know that the network camera is operating, you
can select this option to turn off the LED indicators.
User's Manual - 33
Advertisement
Table of Contents
