Samsung BD-UP5000 User Manual page 39

audio setup
PCM Down Sampling
On : Select this when the Amplifier connected to the player
~
is not 96KHz compatible. 96KHz signals will be down
converted to 48KHz
~ Off : Select this when the Amplifier connected to the player
is 96KHz compatible. Signals will be output without any
changes.
M
HDMI
If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), you should
~
set Digital Audio to PCM.
If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM Down
~
Sampling to On.
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
Off : You can enjoy the movie with the standard Dynamic
~
Range.
On : When Movie soundtracks are played at low volume or
~
from smaller speakers, the system can apply appropriate
compression to make low-level content more intelligible and
prevent dramatic passages from getting too loud.
_ audio setup
Downloaded From Disc-Player.com Samsung Manuals
`
Even when PCM Down Sampling is set to Off, some discs will only output downsampled audio through the
coaxial and optical digital outputs.
System Setup
Language Setup
Music Digital Output
Audio Setup PCM Down Sampling : On O n
Setup
No Disc
Display Setup Dynamic Compression : On
HDMI Setup Speaker Setup
Network Setup
Parental Setup
System Setup
Digital Output
Language Setup
Music PCM Down Sampling : On
Audio Setup Dynamic Compression : On On
Setup
No Disc
Display Setup Speaker Setup
HDMI Setup
Network Setup
Parental Setup
: PCM
Off
: PCM
Off