Advertisement
INSTALLING THE SOFTWARE
Install the accessory upgrade software program only if the main unit used is the AY-NE2000, WJ-MX1000 series or
WJ-MX1200 series.
There is no need to install it if the DVEdit is to be used.
Before installing this upgrade, make sure that V4.0 or above of the software is installed.
Procedure
Press the [Exit] button in ToolBox to exit the system.
When the Caution window appears, click the
Insert the floppy disk labeled "Disk 1" into the floppy disk drive.
• If you are using Windows 95:
Click the [Start] button on the taskbar at the bottom of the display, and select the Run command. Input
"A:\SETUP.EXE" on the Run window, and click
• If you are using Windows 3.1:
Select Program Manager, and press the [F] while holding down the [Alt] key. A pull-down menu is opened. Select
the Run command. Input "A:\SETUP.EXE" on the Run window, and click
The setup windows appears. Click
The "Please insert the diskette labeled disk 2" message now appears. Insert "Disk 2" into the floppy disk drive, and
click
button. Follow the instructions in the messages which appear on the monitor screen for all floppy
disks.
10
button to restart Windows.
button.
button.
Ask your dealer to do this.
button.
Advertisement
