1
Preparations
1.3
Installation
1.3.1 Attaching the cradle
Place a protective cloth or
cushion on a flat surface.
Next, place the product with
the face down on top of the
cloth or cushion.
Fasten the screw tightly
(using a screwdriver or coin)
into the bottom of the stand
base.
- Caution
Do not hold the product upside
down only by the stand.
Disassembly is the reverse order of assembly.
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Do not remove the fixing pin
until you are finished attaching
the stand.
After installing the stand, place
the product upright.
Insert the stand base into the
stand in the direction of the
arrow.
You can remove the fixing pin
and adjust the stand now.
1 Preparations
25