Table of Contents
Advertisement
(5) SENSITIVITY ADJUSTMENT(LEVEL)
Adjustment is not necessary for normal use because the video signal
level is adjusted for standard condition at the factory before it is
shipped.
Perform the following procedures when it is necessary to readjust the
sensitivity for specific camera or subject conditions.
Turn the internal LEVEL adjustment with a small screw driver until the
optimal screen image is obtained.
MONITOR SCREEN
The image is light
The image is dark
Improper adjustment of video signal level, sensitivity level to
compensate for extremely high or low contrast picture quality may
result in an erratic operation of the automatic lens function.
(6) LENS MOUNT
When you find any difficulty in connecting the cable between the lens
and camera, adjust the position of the lens cable as follows;
Fit the lens onto the mounting screw of the camera and turn the
lens clockwise until it is completely stopped at the end.
Then turn it counter-clockwise for the desired position.
It allows the rotation angle to be maximum 340 if
dismounting is not required.
VR ADJUSTMENT DIRECTION
L direction(clockwise)
H direction(counter-clockwise)
5
Advertisement
Table of Contents
