Table of Contents
Advertisement
3.2. Remove the protective film covering the LCD.
3.3. Remove the plastic battery insulator from the battery compartment and make sure the
remote control has a battery inside. Please refer to "Installing & Replacing Battery" if
you need a new battery.
3.4. Power on the unit by pressing the Power button on the remote control or on the back
of the unit.
4. Operating Instruction
4.1 Card and USB
Note: 1) Make sure there are supported picture, music and video files in the Card or USB
device.
2) If there are supported picture and music files in the Card or USB Device, slideshow
will play automatically with background music.( This feature is only for audio files in
MP3 format.)
After turning on the unit, it will show the
startup picture, press MENU repeatedly
to access to built-in memory.
It supports SD/SDHC/MS/MMC and USB
2.0. After inserting a card or USB device,
slideshow will play automatically, then
press MENU twice to access to photo,
music, video, file, calendar and setup.
Press OK to confirm.
7
Advertisement
Table of Contents
